| Welcome, Guest |
You have to register before you can post on our site.
|
| Online Users |
There are currently 984 online users. » 0 Member(s) | 981 Guest(s) Applebot, Baidu, Bing
|
|
|
| 2017 CB1100EX license plate bracket |
|
Posted by: kennyw - 04-25-2018, 05:39 AM - Forum: Mechanical & Technical
- Replies (64)
|
 |
I just placed an order for 10 license plate brackets. I figured if I make one, someone else would want one as well. I'm also including the dimensions if someone wants to make their own.
My cost is $15 each plus shipping. Anyone want one?
|
|
|
| Bike is home |
|
Posted by: glenncal1_imp - 04-24-2018, 08:52 PM - Forum: Mechanical & Technical
- Replies (12)
|
 |
My new to me 2013 came home last night. Bike has 2,600 miles on the clock but hasn't been ridden much the last couple years as the owner had health problems preventing him from riding.
Here are my maintenance plans:
1. Change oil and filter, hasn't been done since 600 mile change.
2. Change air filter. Colorado is a dusty climate and even though bike has been stored inside I figure it is cheap.
3. Service chain.
4. Check tires (they are in good shape externally).
5. Check all fluid levels.
6. Clean battery terminals if needed.
Anything I am missing? Thanks Jim
|
|
|
| misfire under light load? |
|
Posted by: max - 04-24-2018, 06:47 PM - Forum: Mechanical & Technical
- Replies (3)
|
 |
Although i have not seen the bike ( 2014 cb1100 ) in question it apparently adopted this misfire under light load ( driving sedately ).
is it possible that one or both cams are out by some teeth?
All i know is the bike apparently has had it's first service ( valves etc ) done recently.
So before i go and have a look i was wondering if anyone had a similar experience on any type of bike with this symptom.
Thanks max.
|
|
|
| GP Short pipe on a 2014 CB1100? |
|
Posted by: JohnHighlander_imp - 04-24-2018, 01:46 PM - Forum: Accessories/Modifications
- Replies (20)
|
 |
Forgive my ignorance but would I need a pc5 if I remove the OEM Exhaust on my 2014 CB1100 and replace it with a GP style exhaust? Long story short, my bike is so quiet that I've already had over 4 people merge over on me since I bought the bike (3 days ago)...never had that issue with my R1 which had a louder exhaust.
I personally like the GP short pipes... they look sleek imho and are minimalist...which I'm also a fan of. Thoughts?
|
|
|
| CB1100 mods... so far |
|
Posted by: Hondakid_imp - 04-24-2018, 11:34 AM - Forum: Accessories/Modifications
- Replies (5)
|
 |
I received a givi rack today and installed it. Went on ok, had to drill out one of the holes in the rack by 1mm though. I'd have been angry if I didn't have a good drill bit handy that was just the right size.
So with that on my 2014 std I have:
RS3 slip on
Streetshield EX windshield
SW Motech black crash bars
Grip puppies
Givi rear rack
Upcoming I am thinking seat comfort. Got plenty of good research on these forums to browse through!
|
|
|
| KandH Low Seat & Dart Pirrana Flyscreen |
|
Posted by: Mandrau_imp - 04-24-2018, 09:44 AM - Forum: General Discussion
- Replies (4)
|
 |
Got the seat from Samurider over the winter and it fit nicely. A bit wider than the stock seat so even though it is lower my feet are roughly the same on the ground. Short ride around town and it is very comfortable. You can tell right away the foam in the saddle is superior.
The piranna flyscreen is just that. I had a Slip Streamer screen which was handle bar mounted on the bike before and although it relieved wind pressure to the torso, it created some turbulence and noise to the head. Today around town it was nice to be in clean, quiet wind again. Need to test it on the freeway.
|
|
|
|