+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: 2017 CB1100EX license plate bracket (/showthread.php?tid=5167)
2017 CB1100EX license plate bracket - kennyw - 04-25-2018
I just placed an order for 10 license plate brackets. I figured if I make one, someone else would want one as well. I'm also including the dimensions if someone wants to make their own.
My cost is $15 each plus shipping. Anyone want one?
RE: 2017 CB1100EX license plate bracket - 2017EX_imp - 04-25-2018
Kennyw, Nicely done, and I admire your mechanical drawing/drafting skills! What is the material, thickness, and finish? Price is very reasonable, as I have a Joker Machine 1/8" thick hard black anodized aluminum LP backing plate on my 2017. If I did not already have that base covered, I would be all over your nice clean design.
RE: 2017 CB1100EX license plate bracket - the Ferret - 04-25-2018
Very cool Kenny.
2017 CB1100EX license plate bracket - kennyw - 04-25-2018
The finish will be bare aluminum, DA sanded, good for painting or powdercoating when you receive it. I would not recommend leaving it bare.
Thickness is .100" and any grade aluminum should be fine in this application.
RE: 2017 CB1100EX license plate bracket - pdedse - 04-25-2018
Nice work Kennyw...was there a spacer that you had to use as well? Since it's aluminum, what's the issue with leaving it bare?
RE: 2017 CB1100EX license plate bracket - kennyw - 04-25-2018
There will be a pair of spacers required for the top two mounting bolts. I will detail out the assembly hardware you need to buy separately and include instructions in with the plate when it is mailed. The hardware is all easy to find at local hardware stores.
If you leave it bare, it will eventually corrode and look bad (though barely visible other than the reflection in the fender). No telling how long that would take, but I would recommend painting with a clearcoat at a minimum.
RE: 2017 CB1100EX license plate bracket - mattvoyle_imp - 04-27-2018
Do these fit the 2013/2014 fenders too?
2017 CB1100EX license plate bracket - kennyw - 04-27-2018
No, but I could get some made.
RE: 2017 CB1100EX license plate bracket - Roper_imp - 04-27-2018
If you do decide to make some for 2014 models, I will purchase one.
2017 CB1100EX license plate bracket - kennyw - 04-27-2018
I just checked and my guy hasn't cut parts yet. I'll change the order to include 5 of the the 2013-14 brackets.