Easy Way to do a Headlight Mod?

[JustPassinThru_imp]

Sounds like you're looking for two components: first a set of LED "driving" lights. Second, a Setchman that would allow the headlight to be off with the running lights (including the LEDs) remaining on. Right?

Hopefully a toggle that would go between the running lights and the headlight. So that I never inadvertently had no forward lights.

I GUESS I could ground the LED running lights through the headlight low beam, and hard-wire them to a circuit through the ignition switch...always on except when low-beam was on. Then just put an on/off on the headlight low-beam.

I don't want to kill power to the flash-to-pass circuit; so I'd have to put the switch on the low-beam circuit, not headlight power.