08-17-2016, 04:57 AM
Cycle Terminal was closed for a month, so I bought mine last month from place in Japan named Eastern Beaver (a relocated Canadian).
Link is
http://www.easternbeaver.com/Main/Elec__...sm-hm.html .
The specific part you need to fit the one in the headlight assembly is "2P090WP-HM Male, Item no. 2P090WP-HM-M, $2.95"
There is a minimum $20 order (plus $5 shipping), so I also order an extra male/female set (2P090WP-HM Set, Item no. 2P090WP-HM-Set, $4.29) plus a few other interesting things like an SAE plug/lead, some shrink tube, and a few posi-tap connectors). It arrived in 4 days.
I wired the maie 2P090WP connector to the SAE plug/lead, then plugged male into CB1100 female. I used the SAE plug end to connect to and power a EKLIPES EK1-110 usb charging system on the handlebars. In this specific install, I had to switch the wires around because EKLIPES was designed to connect direct to battery (don't understand techs, but followed vendors advise and all worked ok).
Link is
http://www.easternbeaver.com/Main/Elec__...sm-hm.html .
The specific part you need to fit the one in the headlight assembly is "2P090WP-HM Male, Item no. 2P090WP-HM-M, $2.95"
There is a minimum $20 order (plus $5 shipping), so I also order an extra male/female set (2P090WP-HM Set, Item no. 2P090WP-HM-Set, $4.29) plus a few other interesting things like an SAE plug/lead, some shrink tube, and a few posi-tap connectors). It arrived in 4 days.
I wired the maie 2P090WP connector to the SAE plug/lead, then plugged male into CB1100 female. I used the SAE plug end to connect to and power a EKLIPES EK1-110 usb charging system on the handlebars. In this specific install, I had to switch the wires around because EKLIPES was designed to connect direct to battery (don't understand techs, but followed vendors advise and all worked ok).