Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
 CB's max weight
#21
Zion is awesome. Too bad you can’t take your vehicle up the canyon anymore, unless you’re staying at the lodge.

We featured Zion on the 2002 Baby Butt 1000 route (SS1000) but most riders didn’t get there until after dark.
Reply
#22
(11-24-2020, 06:12 AM)Inhouse Bob_imp Wrote:
(11-24-2020, 05:17 AM)bflint_imp Wrote:
(11-23-2020, 11:52 PM)Inhouse Bob_imp Wrote: I don't see the kitchen sink, but I'm sure it's there somewhere Thumbs Up
Great photo of the hills, too!
Mr Ferret also made that observation several years ago .. so I will have to quote you both now. FYI, the pretty pic is in Zion Utah.
Mr Ferret also made that observation several years ago .. so I will have to quote you both now. FYI, the pretty pic is in Zion Utah.
Well, since I must have inadvertently plagiarized his original work, you can just continue to quote Mr. Ferret.
When are we having a rally in Utah, folks??
I'm game for whenever. I live in Utah. I believe Frulk is here, too. The member map also shows someone named Chad in Salt Lake City and James T Kirk apparently keeps the Enterprise in Moab, but I can't find either on the forum. There will be great riding in Southern Utah--Bryce, Zion, etc.--starting in March/April. The canyons in Northern Utah will be a few weeks later. If there's enough interest in Utah, I'll help in whatever capacity I can.
Reply
#23
I think east meet west somewhere in CO.

Would love to do UT too.
Reply
#24
For those hoping to ride to Utah via Colorado in March/April, crossing the Rockies by motorcycle that time of year is iffy at best and downright impossible at worst. Lots of alternatives to get to the Beehive State that time of year but I wouldn’t count on a ride through the mountains then — those are our snowiest months.
Reply
#25
Roper, I don't remember Chad; nor can I find him/her. [url=http://cb1100forum.com/forum/member.php?action=profile&uid=3555]jamestkirk was active for a while but hasn't been seen since last year.
Reply
#26
Just to get back on Mr j3gq's inquiry, I have taken a couple passengers on my CB1100DX ... once in Zion UT for about 30 miles up/down the mountain roads and once with my sister-in-law (bucket list thing for her) on surface streets. The two-up ride felt very different and somewhat uncomfortable for me. I guess it was partly because of the added weight and lack of backrest (eg passenger had to hang on to me the driver), but the passengers didn't ride with me long enough to sync our body motions in the turns. Just felt awkward from a balance perspective. Other than that, bike had plenty of power for 2-up going up and down the mountain.
Reply
#27
(11-25-2020, 10:06 AM)bflint_imp Wrote: Just to get back on Mr j3gq's inquiry, I have taken a couple passengers on my CB1100DX ... once in Zion UT for about 30 miles up/down the mountain roads and once with my sister-in-law (bucket list thing for her) on surface streets. The two-up ride felt very different and somewhat uncomfortable for me. I guess it was partly because of the added weight and lack of backrest (eg passenger had to hang on to me the driver), but the passengers didn't ride with me long enough to sync our body motions in the turns. Just felt awkward from a balance perspective. Other than that, bike had plenty of power for 2-up going up and down the mountain.

Yeah, the harder the passenger tries to be a good passenger, the more off-keel they tend to feel.

The best passengers I find tend to be the ones that don't hang on to anything and have no backrest. Kinda weird - and scary.
Reply
#28
My wife has ridden with me a few times on the CB1100. I hardly notice she's there until I have to stop. Particularly on a steep-ish descent, the brakes have to work a deal harder than with one person only on the bike. I don't find it surprising at all. I also carry a fair load when camping on tour. It certainly weighs the back down, but I must be used to it as I find the bike handles OK. I guess it would be better without gear, but it's a price for touring. Isn't it?
Reply
#29
(11-25-2020, 01:45 PM)Cormanus_imp Wrote: My wife has ridden with me a few times on the CB1100. I hardly notice she's there until I have to stop. Particularly on a steep-ish descent, the brakes have to work a deal harder than with one person only on the bike. I don't find it surprising at all. I also carry a fair load when camping on tour. It certainly weighs the back down, but I must be used to it as I find the bike handles OK. I guess it would be better without gear, but it's a price for touring. Isn't it?

Yeah, no denying the law of physics when stopping hard.

= = =

On a different bike with no back rest I once went over a significant freeway bump. My wife (then girlfriend) who doesn't like to hold on left the saddle and passenger foot pegs.

>>> A cold chill went down my spine. <<<




She landed back in place; then held onto me for the rest of the day.

(I think I also got a rear flat tire 30 minutes later.)
Reply
#30
I am not the person to overload the bike as I don't really have where to go touring and I'm not a fan of camping - forgive me. However riding with a pillion is something I am very accustomed to, as my wife goes out with me very often, and I what I found from those experiences is that bikes that put her up high severely impact her comfort and she keeps on moving around, which in return impacts my comfort and the way bike handles. CB1100 isn't the best when it comes to this, and having more space and a backrest is definitely looked upon favorably. She is definitely more comfortable that on our old Speed Triple, but much less than on the California (pic attached)
Did I mention I absolutely hate getting head-butted by a pillion?
Then again, some motorcycles can be affected negatively by the change in geometry when loading the rear axle, and I reckon that is a thing to consider when loading up. Brakes are also affected by increase in weight, and that's just physics.
So to conclude, if loading up - make sure the subframe can handle the load, adjust tire pressure, adjust suspension settings, balance out the loading, and adjust your road speed to accommodate for slower braking.

'14 CB1100 STD 5 speed
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Weight limit on genuine Honda rear rack DaveP_imp 14 752 11-17-2022, 02:57 AM
Last Post: GoldOxide_imp
  Easy bar end weight removal brian10x_imp 6 400 06-06-2022, 01:04 AM
Last Post: 1973cb750
  Wheel weight Brad14_imp 7 372 07-25-2020, 01:56 AM
Last Post: Brad14_imp
  Too much weight to balance front tire? thebrawnyman_imp 11 602 09-11-2019, 09:37 PM
Last Post: GoldOxide_imp
  Weight of the OEM Wheels on the 2013/2014 std models? misterprofessionality 7 348 04-04-2019, 09:24 PM
Last Post: misterprofessionality
  Stock header weight PowerDubs_imp 6 352 08-25-2018, 09:56 AM
Last Post: the Ferret
  Bar End & Internal Weight Removal 2017EX_imp 1 145 08-05-2017, 07:07 AM
Last Post: use2b_imp
  Weight and preload walrusz06_imp 1 125 04-25-2015, 10:50 PM
Last Post: Siggy Javotnik_imp
  weight wingman1946_imp 13 638 08-18-2013, 11:29 PM
Last Post: the Ferret

Forum Jump:


Users browsing this thread: 1 Guest(s)