Battery Tender pigtail installation

[AKB_imp]

Before I take a stab at installing the my battery tender permanent rings on by CB1100, I was curious if anyone has any advice or suggestion on the best way to route the cable for quick hookup/disconnect?

Couldn't find a thread on this topic, but if there is one just let me know.

Thanks!

[LongRanger_imp]

Not sure if there's a right or wrong way. Mine emerges from beneath the left side cover. I'm sure others have theirs routed differently.

[url=http://s1285.photobucket.com/user/ericlevy/media/Mobile%20Uploads/6EDFA8E3-4BA2-47A0-9350-4FC76988329D_zpsr0orvys2.jpg.html]

[the Ferret]

There is a hole in the sub fender r/h side by the rear shock. I ran mine out there.

[LongRanger_imp]

Hmm, I may have to move mine...

[uscgmac_imp]

Permanent rings? What could be permanent. Anyway, I routed mine to stick out from under the seat right behind the upper rear shock.

Sent from my SM-T350 using Tapatalk

[kennyw]

There is a hole in the sub fender r/h side by the rear shock. I ran mine out there.

That is where mine went. The hard part was putting the connections in a position that doesn't interfere with installing the tool box/plastic tray.

[Rocky_imp]

My Optimate pigtail was already dealer-installed under the seat when I took delivery.

[url=http://s392.photobucket.com/user/Rock500_2008/media/Motorcycles/Honda%20CB1100A/IMG_1998.jpg.html]

[johnf514_imp]

There is a hole in the sub fender r/h side by the rear shock. I ran mine out there.

+1

[the Ferret]

[url=http://smg.photobucket.com/user/theferret111/media/2013_04270029_zpsdfdaf0ea.jpg.html]

[mininsx_imp]

I had mine routed out the left side under the silver side cover but it got chain lube on it there, so I moved it to the right side.