04-28-2022, 08:08 AM
Huh. I just went out to the shop and took a look at mine.
A thought... if the old sensor is broken, why not remove the easy screw, break off the sensor, and have better access to the tight screw.
Then, when you put it back together, use an allen screw and use a round-head allen driver that gives you some angle to get above the swingarm. Replace it with the correct screw next time you remove the wheel to change tires.
A thought... if the old sensor is broken, why not remove the easy screw, break off the sensor, and have better access to the tight screw.
Then, when you put it back together, use an allen screw and use a round-head allen driver that gives you some angle to get above the swingarm. Replace it with the correct screw next time you remove the wheel to change tires.