Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Oil filter failure.... Complete loss of oil pressure
#9
(07-24-2017, 01:52 AM)JimTT_imp Wrote: I have seem motors run on no oil with no damage. If you did not run the engine very long you have nothing to worry about in terms of engine internals. There are documented cases on engines running with no oil to the determine failure point and they run an amazingly long time. Also don't use any filter other than OEM Honda. https://www.youtube.com/watch?v=eASCK9BDMEU

Awesome. I felt like that was the case, but affirmation is so appreciated.

(07-24-2017, 02:12 AM)Lord Popgun_imp Wrote: Once oil gets on the pads you should replace them. Some don't feel that way and "cleaned" them and said they are good. Pads are cheap. Orthopedic surgeons are not.

Absolutely right. Any recommendations on new pads? Just go OEM?
Reply


Messages In This Thread
RE: Oil filter failure.... Complete loss of oil pressure - by x(why)z_imp - 07-24-2017, 02:37 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Oil Filter dave 12 610 07-26-2026, 02:33 PM
Last Post: Gone in 60
  Pod Air Filter Traumend_imp 15 1,547 03-06-2024, 08:42 AM
Last Post: mvk24_imp
  low oil pressure light Garuda78_imp 16 1,168 02-29-2024, 04:09 PM
Last Post: Garuda78_imp
  CB1100ex Tires pressure, when changed tube to tubeless tory_imp 10 964 10-09-2023, 07:51 AM
Last Post: Cormanus
  K&N air filter fitment question nikolus_imp 28 3,877 05-20-2023, 09:26 AM
Last Post: Klamathonian_imp
  low oil pressure light kaput norton1974_imp 11 1,152 03-28-2023, 08:58 AM
Last Post: peterbaron
  Fuel filter replacement Mafd2_imp 36 3,116 02-11-2023, 01:54 AM
Last Post: GoldOxide_imp
  Oil filter won’t come off Jgarciajr40_imp 20 1,739 01-01-2023, 09:38 AM
Last Post: Houtman_imp
   Oil Filter Options Yata-Garasu_imp 78 7,576 09-28-2022, 08:03 AM
Last Post: Yata-Garasu_imp
  Air filter options - W/ Part #'s PowerDubs_imp 10 968 09-21-2022, 04:02 AM
Last Post: PowerDubs_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)