Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bike surging at speed
#11
Seafoam is your friend ! With the summer blend of fuel not surprised with fueling issues . I buy my seafoam at Northern Tool for about &6.00 a bottle. Also like chevron’s tech treatment. I use them both in every tank,no issues with idle or high rpm stumbles. Some say they are snake oils , but Iam a true believer , just my 2 cents .
Reply
#12
(06-26-2020, 11:17 PM)obleo_imp Wrote: Seafoam is your friend ! With the summer blend of fuel not surprised with fueling issues . I buy my seafoam at Northern Tool for about &6.00 a bottle. Also like chevron’s tech treatment. I use them both in every tank,no issues with idle or high rpm stumbles. Some say they are snake oils , but Iam a true believer , just my 2 cents .


I had always ran chevron supreme in the bike ... never had a problem. Then started reading online about throwing money away and could be getting old gas as people don’t purchase it and it sits in the tank... I will check it out tomorrow morning


Sent from my iPhone using Tapatalk
Reply
#13
Follow up;

Put in seafoam
Changed plugs the looked barely worn at 21k. They were Gapped are .36
Changed oil while I was at it.
Ran the tank of gas out.
No more stumbles
I will go again tomorrow.

Thanks for the help.


Sent from my iPhone using Tapatalk
Reply
#14
good news. Keep us informed.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CB1100 Idle speed instability problem ericlo69_imp 1,434 117,285 07-26-2026, 01:51 AM
Last Post: Cormanus
  Public Service Announcement - Speed Sensor Clip Gone in 60 7 849 10-22-2025, 02:11 PM
Last Post: Gone in 60
  New speed meter replacement ACE_IRA_imp 3 518 02-13-2025, 06:25 AM
Last Post: Lord Popgun
  Install a 6-speed trans on a 2013? amacbeth_imp 37 3,160 02-21-2023, 12:22 PM
Last Post: PowerDubs_imp
  How to remove 2013 Rear ABS/Speed sensor danieljrmurray_imp 16 1,382 06-03-2022, 01:16 PM
Last Post: pekingduck
  Speed bleeders Raceman_imp 21 1,493 12-14-2021, 04:30 AM
Last Post: peterbaron
  speed sensor output Lord Popgun 16 1,099 10-09-2020, 09:20 AM
Last Post: Lord Popgun
  5 Speed, extra tooth Rogerdj_imp 2 311 09-12-2020, 08:01 PM
Last Post: pekingduck
  RE: CB1100 Idle speed instability problem Lambchops_imp 52 3,337 07-09-2020, 08:06 AM
Last Post: SportsterDoc
  Looking for a Speed bleeder P/N for Clutch Slave Cylinder venturer434_imp 6 933 10-14-2017, 09:01 PM
Last Post: venturer434_imp

Forum Jump:


Users browsing this thread: 2 Guest(s)