Yoshimura Full System

[FUZZY_imp]

Sounds mean...! how does she feel Fuzzy..?

Thanks. A lot more responsive. Did slow roll then nailed in 1st. Floated front tire. I feel it needs a little more fuel. Can't wait to get power commander on & dyno'd. Still power available.

So nice! That seat looks comfy.

Thanks. It is but with a lot less padding than stock seat.

 

[Guth_imp]

I have a friend that was the lead technician with Honda Racing for Miguel DuHamel (Yvon's son) a number of years ago, who now runs an independent shop here in Portland. I recently stopped by his shop while out on the CB1100 to pick up some parts for my Hawk GT. He said that the bike was running lean based on the exhaust note upon deceleration — very common story. He suggested a Power Commander unit (which was not available at the time). I have no idea what's involved with installing one of those.

 

[FUZZY_imp]

I have a friend that was the lead technician with Honda Racing for Miguel DuHamel (Yvon's son) a number of years ago, who now runs an independent shop here in Portland. I recently stopped by his shop while out on the CB1100 to pick up some parts for my Hawk GT. He said that the bike was running lean based on the exhaust note upon deceleration — very common story. He suggested a Power Commander unit (which was not available at the time). I have no idea what's involved with installing one of those.

Great report! From observing inside of stock header & running Yosh, I can definately tell you it's running lean. He is also correct about exhaust on decel. No hint of any additional fuel delivery. As far as install its simple plug n play. Mounts under seat with hooknloop. Then just take to dyno.

 

[FUZZY_imp]

FYI. Just finished 1st service with pipe installed. No problem @ all accessing oil filter. Just used my trusty XL Channellock pliers for my filter wrench. Plenty of clearance.

 

[Joola_imp]

FYI. Just finished 1st service with pipe installed. No problem @ all accessing oil filter. Just used my trusty XL Channellock pliers for my filter wrench. Plenty of clearance.

Good to know. Thanks for the follow up.

 

[wildezt_imp]

Thanks for the feedback Fuzzy.!

 

[FUZZY_imp]

Thanks for the feedback Fuzzy.!

No problem guys!

 

[silascopathic_imp]

Fuzzy, what size baffle do you have on your yosh pipe? pics?

 

[FUZZY_imp]

Fuzzy, what size baffle do you have on your yosh pipe? pics?

It's 1 1/8" non removable baffle with straight through flow. I'll get a pic when it cools off out there tonight. Lol.

 

[silascopathic_imp]

yea, id love to see another picture. I'm jealous you have been riding with it haha

 

[FUZZY_imp]

yea, id love to see another picture. I'm jealous you have been riding with it haha

 

[Guth_imp]

FYI. Just finished 1st service with pipe installed. No problem @ all accessing oil filter. Just used my trusty XL Channellock pliers for my filter wrench. Plenty of clearance.

Thanks Fuzzy, helpful for others to know.

 

[silascopathic_imp]

Thanks Fuzzy!

 

[FUZZY_imp]

Power Commander V will arrive MONDAY! Talked to Honda of Houston & for $200 get to sit in air conditioned observation room to watch them dyno the CB on a DynoJet machine. Hope to get done next week!

 

[silascopathic_imp]

DUDE. Lemme know how that goes!!! I need one now!!

 

[FUZZY_imp]

DUDE. Lemme know how that goes!!! I need one now!!

Will do!

 

[FUZZY_imp]

It's here! Gonna put on tomorrow & remove snorkel then take for a spin.

 

[silascopathic_imp]

pics and videos if you would please!

 

[FUZZY_imp]

Power Commander installed. check
Air Box Modded. check
Test Ride.
Dyno.

Power Commander installed. check
Air Box Modded. check
Test Ride. Check :banana:
Dyno.


[/img]

[/img]

[/img]

[/img]

Let me know of you can see this.

 

[Mackerel_imp]

Is it just me or do none of those images show up?