Login

binarkansas_imp · 05-20-2021, 02:09 AM

I am needing to change tires on my 2013 CB1100. The parts diagram I have found online show the Axle nut being 22mm. Mine is larger. Can anyone tell me the correct nut size. This bike is practically new, no mods whatsoever.

Thanks in advance

Binarkansas

Rocky_imp · 05-20-2021, 02:38 AM

My 2014 is 27mm.

Lord Popgun · 05-20-2021, 02:42 AM

I believe the 2013, which I have, is 32mm. I can verify when I get home. I do remember I had to buy a new socket back in '13 as the nut is so big.

The nut and axle size changed in 2014 as noted by the above post by Rocky.

binarkansas_imp · 05-20-2021, 02:58 AM

I believe it is a 32mm and have ordered one. I am amazed at the response time for this forum.

Thanks to those who replied.

I bought the 2013 CB1100 almost two years ago. It had 2400 miles on it, always maintained and stored inside. In all respects it was as close to new as you would find. It still has the original tires on it. I have purchased two new tires and was ready to install, but I had no socket to fit.

Again, thanks for the fast response with answers.

Barry

Tom_imp · 05-20-2021, 03:18 AM

one side is 22mm and the other side is 27mm

Lord Popgun · 05-20-2021, 04:32 AM

OK, just to verify I just went in the garage and put the socket on the nut. It is 32mm.

Tom, on the 2014 and up models the axle was changed to a smaller diameter and thus has a smaller (27mm) nut.

Houtman_imp · 05-20-2021, 05:56 AM

(05-20-2021, 02:58 AM)binarkansas_imp Wrote: I believe it is a 32mm and have ordered one. I am amazed at the response time for this forum.

Thanks to those who replied.

I bought the 2013 CB1100 almost two years ago. It had 2400 miles on it, always maintained and stored inside. In all respects it was as close to new as you would find. It still has the original tires on it. I have purchased two new tires and was ready to install, but I had no socket to fit.

Again, thanks for the fast response with answers.

Barry

Tom_imp · 05-20-2021, 06:16 AM

(05-20-2021, 04:32 AM)Lord Popgun_imp Wrote: OK, just to verify I just went in the garage and put the socket on the nut. It is 32mm.

Tom, on the 2014 and up models the axle was changed to a smaller diameter and thus has a smaller (27mm) nut.

On the 2013 it's definitely 22 and 27. I was so happy to pitch in.

Lord Popgun · 05-20-2021, 08:03 AM

Tom, I have a 2013. The rear axle nut is 32mm

Randy B · 05-20-2021, 03:37 PM

Here is a link to the tools that SHOULD have come with your bike, but Honda decided not to include for some reason. (32mm)
https://www.hondapartshouse.com/oemparts...d3269/tool

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Rear axle diameter 2014 vs 2017	ashishNJ_imp	4	460	08-28-2023, 06:07 PM Last Post: dopaytoplay_imp
	rear brake question	Crossfire_imp	12	777	02-18-2022, 03:02 AM Last Post: bvictory_imp
	Rear Axle Nut	Billie_imp	7	505	03-22-2021, 12:56 PM Last Post: Billie_imp
	New Rear Tire and Rear Brake Pads	memphismike_imp	5	482	06-11-2018, 09:35 PM Last Post: memphismike_imp
	front wheel axle spacer collars switched	Searcher_imp	6	462	05-25-2017, 10:36 AM Last Post: Searcher_imp
	Rear Axle Torque?	JustPassinThru_imp	3	300	06-16-2015, 01:54 PM Last Post: JustPassinThru_imp
	Rear brake stupid question.	NightRider_imp	8	577	03-16-2015, 11:46 PM Last Post: Firstfour_imp
	Front Axle Pinch Bolt Torque ?	rocket_imp	8	656	03-16-2015, 11:32 PM Last Post: rocket_imp
	83lbf-ft on the rear axle nut	Razorbacjac_imp	21	1,085	03-15-2015, 12:19 PM Last Post: Lord Popgun
	Axle diameters?? For new tool	rboe	2	316	09-07-2014, 11:56 PM Last Post: rboe