Login

motorider6_imp · 05-04-2021, 04:21 PM

Replaced stock with bars from CB900F https://youtube.com/shorts/_goF6MoueXo?feature=share

Stichill · 05-05-2021, 01:14 AM

Nicely done! It's cool when you can use factory parts from another bike rather than buying expensive aftermarket gear.

GoldOxide_imp · 05-05-2021, 01:44 AM

Looks tidy Mr. Daddy! Thumbs Up

pekingduck · 05-05-2021, 02:17 AM

Nice job. I had tried a set of 919 bars on my 2013 CB1100. The switch pinlocating holes had to be relocated, but otherwise, a nice looking and feeling bar. But I also noticed the increased steering effort, and the "power steering" leverage of the stock bars was gone.

And while it isn't an inexpensive bar, there is ample straight portion on the ends to mount everything. many aftermarket bars aren't bent in a way to allow space, so consequently the master cylinders get clamped on the curved portion, angling the lever tips up a bit.

LikeAfox_imp · 05-05-2021, 12:51 PM

What's the appeal of these? Are they shorter? Tighter? I can't really tell the difference from the video. Grips are really nice tho.

pekingduck · 05-06-2021, 02:30 PM

(05-05-2021, 12:51 PM)LikeAfox_imp Wrote: What's the appeal of these? Are they shorter? Tighter? I can't really tell the difference from the video. Grips are really nice tho.

919 bars are about 4" narrower, 1-1/2" lower, and sweep back about an inch more at the tips. I thought they were a nice bend, nearly identical to an SV650, except the clamp serations are in the correct spacing for a Honda.

michael1954 · 05-06-2021, 03:35 PM

(05-04-2021, 04:21 PM)motorider6_imp Wrote: Replaced stock with bars from CB900F https://youtube.com/shorts/_goF6MoueXo?feature=share

Do they make you ride bent over any? Also, where did you get the black front fender? Thanks!

motorider6_imp · 05-25-2021, 10:28 PM

Yes, the riding position is more sporting. For the first couple of long rides, I tired easily but now, I don't really notice. The fenders and other mods came from Webike (Japan).

(05-05-2021, 12:51 PM)LikeAfox_imp Wrote: What's the appeal of these? Are they shorter? Tighter? I can't really tell the difference from the video. Grips are really nice tho.

Less cruiser, more sport.

(05-05-2021, 01:14 AM)Stichill_imp Wrote: Nicely done! It's cool when you can use factory parts from another bike rather than buying expensive aftermarket gear.

I believe others have used bars from the CB500.

tommymck · 05-25-2021, 11:29 PM

(05-05-2021, 01:44 AM)GoldOxide_imp Wrote: Looks tidy Mr. Daddy!

GO's eye for detail never ceases to amaze!

Yanivic_imp · 05-27-2021, 11:18 AM

Looks good.

Another option could be, one from cb1100 RS. As it’s oem, it does have the holes predrilled.

Interestingly, you can buy the oem from revzilla

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	USB ON HANDLEBAR - connection at battery direct .	Alfgaxatico_imp	38	2,657	05-17-2026, 10:20 PM Last Post: Cormanus
	Quad Lock handlebar vs clutch perch and bar-end mirrors	Uncle Sixer	1	314	01-04-2026, 01:26 PM Last Post: pekingduck
	Handlebar control symmetry	Uncle Sixer	17	1,635	08-07-2025, 05:24 AM Last Post: Cormanus
	Handlebar Risers??	bubblerboy64_imp	16	1,449	07-16-2022, 06:04 AM Last Post: calipo223_imp
	What to do with the handlebar mounts when converting to clip-on controls?	misterprofessionality	7	738	04-08-2022, 03:41 AM Last Post: misterprofessionality
	CB 1100 EX Handlebar original or other?	MALACAY_imp	4	533	04-03-2022, 01:00 AM Last Post: Cormanus
	CRF1000 handlebar	mspaansnl_imp	0	231	05-25-2021, 04:57 AM Last Post: mspaansnl_imp
	HANDLEBAR RISERS - is really necessary???	Alfgaxatico_imp	19	1,364	12-16-2020, 10:40 PM Last Post: GoldOxide_imp
	Early 80’s handlebar clamp	PowerDubs_imp	33	2,029	10-10-2020, 02:36 AM Last Post: Gordo_imp
	More handlebar talk - Samurider Type 2 replacements	GrabOn_imp	10	947	07-23-2020, 01:16 AM Last Post: KiowaEagle_imp

Threaded Mode Handlebar from 919
Author	Message