+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Handlebar from 919 (/showthread.php?tid=8192)
Pages:
1
2
Handlebar from 919 - motorider6_imp - 05-04-2021
Replaced stock with bars from CB900F https://youtube.com/shorts/_goF6MoueXo?feature=share
RE: Handlebar from 919 - Stichill_imp - 05-05-2021
Nicely done! It's cool when you can use factory parts from another bike rather than buying expensive aftermarket gear.
RE: Handlebar from 919 - GoldOxide_imp - 05-05-2021
Looks tidy Mr. Daddy!
RE: Handlebar from 919 - pekingduck - 05-05-2021
Nice job. I had tried a set of 919 bars on my 2013 CB1100. The switch pinlocating holes had to be relocated, but otherwise, a nice looking and feeling bar. But I also noticed the increased steering effort, and the "power steering" leverage of the stock bars was gone.
And while it isn't an inexpensive bar, there is ample straight portion on the ends to mount everything. many aftermarket bars aren't bent in a way to allow space, so consequently the master cylinders get clamped on the curved portion, angling the lever tips up a bit.
RE: Handlebar from 919 - LikeAfox_imp - 05-05-2021
What's the appeal of these? Are they shorter? Tighter? I can't really tell the difference from the video. Grips are really nice tho.
RE: Handlebar from 919 - pekingduck - 05-06-2021
(05-05-2021, 12:51 PM)LikeAfox_imp Wrote: What's the appeal of these? Are they shorter? Tighter? I can't really tell the difference from the video. Grips are really nice tho.919 bars are about 4" narrower, 1-1/2" lower, and sweep back about an inch more at the tips. I thought they were a nice bend, nearly identical to an SV650, except the clamp serations are in the correct spacing for a Honda.
RE: Handlebar from 919 - michael1954 - 05-06-2021
(05-04-2021, 04:21 PM)motorider6_imp Wrote: Replaced stock with bars from CB900F https://youtube.com/shorts/_goF6MoueXo?feature=share
Do they make you ride bent over any? Also, where did you get the black front fender? Thanks!
RE: Handlebar from 919 - motorider6_imp - 05-25-2021
Yes, the riding position is more sporting. For the first couple of long rides, I tired easily but now, I don't really notice. The fenders and other mods came from Webike (Japan).
(05-05-2021, 12:51 PM)LikeAfox_imp Wrote: What's the appeal of these? Are they shorter? Tighter? I can't really tell the difference from the video. Grips are really nice tho.
Less cruiser, more sport.
(05-05-2021, 01:14 AM)Stichill_imp Wrote: Nicely done! It's cool when you can use factory parts from another bike rather than buying expensive aftermarket gear.
I believe others have used bars from the CB500.
RE: Handlebar from 919 - tommymck - 05-25-2021
(05-05-2021, 01:44 AM)GoldOxide_imp Wrote: Looks tidy Mr. Daddy!
GO's eye for detail never ceases to amaze!
RE: Handlebar from 919 - Yanivic_imp - 05-27-2021
Looks good.
Another option could be, one from cb1100 RS. As it’s oem, it does have the holes predrilled.
Interestingly, you can buy the oem from revzilla