Login

gossman_imp · 03-09-2015, 07:41 AM

(03-09-2015, 07:37 AM)thessler3_imp Wrote: Mounted mine between the headlight and headlight mounts. Works fine there. Make sure you put the pads between the shield and instruments.

Same here. I would suggest to put a mark so that the headlight remains properly adjusted

Lord Popgun · 03-09-2015, 09:17 AM

gossman,

That is a good idea. I wish I had done that when I mounted mine. If you notice, there are base lines on the shell and mounting bracket for reference (as per the manual).

gossman_imp · 03-09-2015, 09:48 AM

(03-09-2015, 09:17 AM)Lord Popgun_imp Wrote: gossman,

That is a good idea. I wish I had done that when I mounted mine. If you notice, there are base lines on the shell and mounting bracket for reference (as per the manual).

Guess I should read the manual Thanks

Lord Popgun · 03-09-2015, 10:59 AM

To clarify, that's the service manual.. Wink

Might be in the owners man. too, but I didn't look...

Fenianbastard_imp · 10-15-2021, 09:53 AM

Just what I was looking for. Thanks

Jonnyteabag_imp · 10-19-2021, 01:39 AM

Snap! https://imgur.com/a/QfGXeQZ
I went with the brackets on the outside of the headlamp brackets..I tried both positions but found the inside position placed the screen under too much pressure for my liking, so not as pretty but works for me.

Ride safe,JT Rolleyes

j3gq_imp · 01-24-2022, 04:33 AM

see mymore recent [url=http://cb1100forum.com/forum/showthread.php?tid=17674&pid=313038#pid313038]thread

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	to puig or not to puig (or, which Puig screens fit ?)	j3gq_imp	53	3,279	05-30-2022, 04:13 AM Last Post: j3gq_imp
	Windjammer ss. Install	caddy425_imp	15	1,193	03-29-2022, 01:28 PM Last Post: Canadianredneck_imp
	Puig Vision Windscreen	Interceptor Pilot_imp	5	514	03-03-2022, 08:39 AM Last Post: GoldOxide_imp
	Puig now listing the CB1100	CB4ME_imp	8	604	01-24-2022, 04:34 AM Last Post: j3gq_imp
	Yoshimura RS3 Install. 2013 Kit on a 2014 and sorted the center stand issue!	rdtshaw_imp	17	1,190	01-05-2022, 10:54 PM Last Post: Nibis_imp
	Honda top case install	Jonnyteabag_imp	11	860	12-31-2021, 09:22 AM Last Post: Jonnyteabag_imp
	2017 CB1100EX Clearwater Darla Lights Install	TXBikerGuy	7	583	07-25-2020, 08:51 AM Last Post: TXBikerGuy
	tail-bag install	Chuckk_imp	6	591	11-19-2019, 05:49 AM Last Post: IndianRider_imp
	Help! Dynojet PC V Install Not Going Well, 2014 CB	MinkeyChief_imp	3	389	11-05-2019, 03:53 AM Last Post: MinkeyChief_imp
	Puig Windscreen Quality	Skypilot_imp	13	880	11-01-2019, 11:43 AM Last Post: MWV1500_imp

Threaded Mode Puig Plus install question
Author	Message