The CB1100 Community Forum › Honda CB1100 Discussions › Mechanical & Technical v
Front Axle Pinch Bolt Torque ?

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
Front Axle Pinch Bolt Torque ?
rocket_imp Offline
Running Like a Top
Posts: 65
Threads: 15
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2014
#1
03-16-2015, 06:24 AM
Just installed the Superbrace & want to retorque the axle pinch bolts. I guessed at 25 #, but would like something more accurate than my guess. Thanks, Rocket
Find
Reply
metallyguitarded_imp Offline
Road Warrior
Posts: 1,369
Threads: 62
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jul 2014
#2
03-16-2015, 06:45 AM
When I installed my Superbrace, I referenced the ferret's thread on how to install fork gaiters for the pinch bolt torque measurements (19 ft lbs). I finally broke down and ordered the service manual yesterday but knowing how detailed the ferret is in his calculations, I have no doubt that it's spot on.

His thread is here: http://cb1100forum.com/forum/showthread.php?tid=3289 In post #3, he lists the torque values at the end.
Find
Reply
redbirds_imp Offline
Road Warrior
Posts: 3,872
Threads: 186
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2013
#3
03-16-2015, 06:48 AM
Honda service manual says 17flbs for the upper triple clamp bolts and 32flbs for the lower.

19flbs for the pinch bolts.
Find
Reply
metallyguitarded_imp Offline
Road Warrior
Posts: 1,369
Threads: 62
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jul 2014
#4
03-16-2015, 06:51 AM
(03-16-2015, 06:48 AM)redbirds_imp Wrote: Honda service manual says 17flbs for the upper triple clamp bolts and 32flbs for the lower.

19flbs for the pinch bolts.

I will NEVER trust the ferret AGAIN.

Am I correct in assuming the "clamp bolts" are the same as the "pinch bolts"?
Find
Reply
redbirds_imp Offline
Road Warrior
Posts: 3,872
Threads: 186
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2013
#5
03-16-2015, 06:55 AM
(03-16-2015, 06:51 AM)metallyguitarded_imp Wrote:
(03-16-2015, 06:48 AM)redbirds_imp Wrote: Honda service manual says 17flbs for the upper triple clamp bolts and 32flbs for the lower.

19flbs for the pinch bolts.

I will NEVER trust the ferret AGAIN.

Am I correct in assuming the "clamp bolts" are the same as the "pinch bolts"?

I will NEVER trust the ferret AGAIN.

Am I correct in assuming the "clamp bolts" are the same as the "pinch bolts"?
You were right the first time. I screwed up and listed the triple clamp values then corrected my mistake and listed the values for the pinch bolts.
Find
Reply
metallyguitarded_imp Offline
Road Warrior
Posts: 1,369
Threads: 62
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jul 2014
#6
03-16-2015, 07:04 AM
(03-16-2015, 06:55 AM)redbirds_imp Wrote:
(03-16-2015, 06:51 AM)metallyguitarded_imp Wrote:
(03-16-2015, 06:48 AM)redbirds_imp Wrote: Honda service manual says 17flbs for the upper triple clamp bolts and 32flbs for the lower.

19flbs for the pinch bolts.

I will NEVER trust the ferret AGAIN.

Am I correct in assuming the "clamp bolts" are the same as the "pinch bolts"?

I will NEVER trust the ferret AGAIN.

Am I correct in assuming the "clamp bolts" are the same as the "pinch bolts"?
You were right the first time. I screwed up and listed the triple clamp values then corrected my mistake and listed the values for the pinch bolts.

I will NEVER trust the ferret AGAIN.

Am I correct in assuming the "clamp bolts" are the same as the "pinch bolts"?
You were right the first time. I screwed up and listed the triple clamp values then corrected my mistake and listed the values for the pinch bolts.
Like I said, I never, ever, doubt the ferret.
Find
Reply
CA200_imp Offline
Been There
Posts: 641
Threads: 42
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2013
#7
03-16-2015, 07:09 AM
ROFL
Find
Reply
the Ferret Offline
Road Warrior
Posts: 23,431
Threads: 697
Likes Received: 511 in 233 posts
Likes Given: 676
Joined: Apr 2025
#8
03-16-2015, 07:11 AM
ROFL Dang you guys had me confused for a minute.

I'm still not sure if I posted it right or wrong. guess it depends on what you are labeling pinch bolts. I would think those would be the two little ones down by the axle on the front of the lower legs.
Find
Reply
rocket_imp Offline
Running Like a Top
Posts: 65
Threads: 15
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2014
#9
03-16-2015, 11:32 PM
Thanks for the help.
Ferret: Yes the AXLE pinch bolts.
Find
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear axle diameter 2014 vs 2017 ashishNJ_imp 4 392 08-28-2023, 06:07 PM
Last Post: dopaytoplay_imp
  Front sprocket bolt cant be moved misterprofessionality 55 3,665 03-13-2023, 12:18 PM
Last Post: misterprofessionality
  Torque value question Jonnyteabag_imp 9 528 03-10-2023, 01:00 AM
Last Post: 1973cb750
  2014 cb1100 Torque specs for two specific locations Dd808_imp 8 493 09-08-2021, 11:07 AM
Last Post: Dd808_imp
  rear axle nut question binarkansas_imp 12 713 05-21-2021, 01:49 AM
Last Post: GoldOxide_imp
  Handlebar bolts torque value? (CB1100RS -18) Olof_imp 3 308 04-03-2021, 01:35 AM
Last Post: Lord Popgun
  Rear Axle Nut Billie_imp 7 415 03-22-2021, 12:56 PM
Last Post: Billie_imp
  Fork Tube hex head bolt tool fitment ? bflint 8 549 11-30-2020, 06:24 PM
Last Post: jtopiso_imp
  Engine mount bolt torque value TCinNC_imp 43 1,875 07-31-2020, 05:00 PM
Last Post: treedoc_imp
  Shock bolt torque HBFL_imp 9 521 04-11-2019, 07:04 AM
Last Post: Cormanus

Forum Jump:


Users browsing this thread: 1 Guest(s)