09-11-2020, 09:00 PM
Best is to follow the instruction.
We, at our car dealer use the Permatex Gasket Maker....and it says allow 24 hrs to fully cure before filling fluids...
Sometimes we wait much less time (customer waiting/rush) before filling and no leaks*
The trick is, after application and finger tight let it dry for 1 hr before torquing to specs...*
*don't blame me if you use a short cut and starts leaking
We, at our car dealer use the Permatex Gasket Maker....and it says allow 24 hrs to fully cure before filling fluids...
Sometimes we wait much less time (customer waiting/rush) before filling and no leaks*
The trick is, after application and finger tight let it dry for 1 hr before torquing to specs...*
*don't blame me if you use a short cut and starts leaking