09-22-2020, 11:10 AM
(09-22-2020, 10:49 AM)Ninemeister_imp Wrote: This was the Renthal supplied.
To be fair to the supplier, I ordered a sprocket to fit a stock CB11 and this is what they sent. It's only when offering it up did I realise that the parts on my bike were not stock.
Hey, I'm not complaining, I love those Excel wheels and they are one of the reasons why I had to buy it as soon as I saw the advert.
At the moment it's looking likely that I will have to have a sprocket made which is no big deal aside from the 2 weeks more off the road waiting on the hard annodising.
I should also mention that I have sent the information on the sprocket to Takashi (Samurider) who has recently shipped me the additional White House parts for the K10 package. Parts arrived (great service!) but as yet have had no response on the chain wheel.
All of the listed bikes use 112 bore, but 5 bolts. So their error as they still sent the wrong parts for a stock CB1100, even if your wheel is non-standard. I noticed also that it has 36 spokes vs the CB1100s' 40, but not to worry as the Africa Twin uses 32 spokes. And the spokes are stainless, as they are stamped with "B", signifying Buchanan's Spokes, who are a very high grade wheel and spoke specialist in the US. They won't break.
It is likely an off-the shelf sprocket as they would not have made an adaptor for a non-standard sprocket. Can you look for any casting numbers/letters/markings on the inside of the flange and hub? Then I can see what brand hub it is. I looked through all the Hondas that would have wire spokes with a disc and cannot find any match.