09-22-2020, 09:52 AM
(09-22-2020, 09:02 AM)pekingduck_imp Wrote: In the US, wire wheels came only on the 2017 models, but they use the same 5 bolt sprockets as the cast wheels. Same on 2011 Japan market bikes. On US wire wheels, the disc bolts directly to the hub.
Honda CB1100s all have 5-bolt sprockets with an inner bore of 112mm and a PCD (bolt circle diameter) of 138mm, with five 12mm studs. Just like every Honda larger than 1000cc since 2000, except Africa Twin, which is even smaller. Pretty sure it's not a Honda hub.
Looks like the adaptor ring between the drive flange and the sprocket is just a spacer, with no threads. What is the diameter of the drive flange where a sprocket inner bore would ride? Is it the same 112mm as the spacer? That could determine what bike the hub is from. It is possibly a dirt bike hub.
It's 112mm, same as the stock Renthal sprocket for the CB11.
There is a plain spacer between the hub and the sprocket.