12-19-2015, 07:36 AM
I have this weird superstition, on each new vechicle good moments happen and bad/scary moments.
I just hope this is the worst of the scary moments and I've had my worst share of it
ow well, when passing at the dealer to install fork boots, I'll also ask him to also show me the quick connectors.
I pointed out in blue on this picture what I moved after I got home
that black rubber piece on the left is now moved a little bit to the right, so it sits over that small exposed piece of green, that seemed like a final thing that had to be done, it felt like it now sits in place when I moved it...
But if only someone could take a picture from that same angle, it could clarify if it should look like that.
I found a site in Japanese, of a first gen. CB
http://chiba11.blog.fc2.com/blog-entry-351.html
Still dont get the function of the rubber part
![[Image: 25379206fd0338b36aa7b02c315ede39.jpg]](https://cb1100forum.net/forum/uploads/imp/201512/25379206fd0338b36aa7b02c315ede39.jpg)
![[Image: 0a2974c19bf5b4c421c319610c9cb872.jpg]](https://cb1100forum.net/forum/uploads/imp/201512/0a2974c19bf5b4c421c319610c9cb872.jpg)
I just hope this is the worst of the scary moments and I've had my worst share of it
ow well, when passing at the dealer to install fork boots, I'll also ask him to also show me the quick connectors.
(12-19-2015, 07:07 AM)kmoney_imp Wrote: That's crazy. I've always hated those quick connectors a but, precisely for this reason.
The connection in the after position looks right. The only thing is that the rubber piece shouldn't be hanging there, but should actually be pressed into place in order to make it impossible for the green clips to be released with the rubber in place. I do t have a pic, but it threads through the centre of the green clips in the little opening in the black plastic.
I pointed out in blue on this picture what I moved after I got home
that black rubber piece on the left is now moved a little bit to the right, so it sits over that small exposed piece of green, that seemed like a final thing that had to be done, it felt like it now sits in place when I moved it...
But if only someone could take a picture from that same angle, it could clarify if it should look like that.
I found a site in Japanese, of a first gen. CB
http://chiba11.blog.fc2.com/blog-entry-351.html
Still dont get the function of the rubber part