03-09-2019, 12:00 PM
the time has come to install the front shinko777 120/90/18 on my 2017 CB 1100ex..I was able to squeeze 2840 miles out of the front, just a little more than the rear gave me.. learning from the past, I did a more thorough application of the 3M 5200.. I gave it 2 coats right off the bat, concentrating on filling every spoke nut void..I used a smaller acid brush this time.. it acted a little more like a bondo spreader, which I liked.. I took a few more pics.. perhaps Peter can post them for me.. installing the wheel on the bike might be a little bit of a challenge.. we will see.. chuckk j.