01-15-2021, 11:07 AM
Dear Mr Goat, in addition to the great advice here is a picture taken from the right side of the bike, when you rotate the grip it shows the rear cable pulls the throttle open and the forward cable closes it in case the spring on the throttle body fails to close it ( i have not heard of such a case ), depending on the cost/difficulty it could be that the closing cable can be omitted, but the inside cable should be removed from the throttle handle by unscrewing the two philips screws, then carefully splitting the housing and taking the cable out to prevent a possible jam malfunction from the broken cable, just a thought.
And to find out which cable has broken just pull on the outside of the cables on the right side grip, the top one with the adjusting nuts is the open cable, the lower one is the closing cable, no need to open anything up to check which one is defective.
And to find out which cable has broken just pull on the outside of the cables on the right side grip, the top one with the adjusting nuts is the open cable, the lower one is the closing cable, no need to open anything up to check which one is defective.