02-19-2023, 10:05 AM
As noted above unless you are racking up lots of highway miles having that 6th gear is not really a factor.
Max tq on this bike is at 5000 rpm so steady cruise at 4000 rpm or so keeps you right under the tq peak which means downshifting is not required in the event you need to quickly accelerate. I’d advise against running around town at 2500 rpm in 6th. If you get in a tight spot and need to accelerate quickly you are gonna need a downshift. Just because the bike will run 6th down low like that does not mean it’s ideal.
All my riding is city in the Dallas metroplex, many times I’ve had to quickly roll on the throttle to avoid distracted drivers. Regardless of speed if the revs fall below 3500 I’m looking for a lower gear.
A lot of bikes won’t tolerate lugging, my Monster 1100 was a 3 speed unless you were doing 50+ Mph
Max tq on this bike is at 5000 rpm so steady cruise at 4000 rpm or so keeps you right under the tq peak which means downshifting is not required in the event you need to quickly accelerate. I’d advise against running around town at 2500 rpm in 6th. If you get in a tight spot and need to accelerate quickly you are gonna need a downshift. Just because the bike will run 6th down low like that does not mean it’s ideal.
All my riding is city in the Dallas metroplex, many times I’ve had to quickly roll on the throttle to avoid distracted drivers. Regardless of speed if the revs fall below 3500 I’m looking for a lower gear.
A lot of bikes won’t tolerate lugging, my Monster 1100 was a 3 speed unless you were doing 50+ Mph