Slight Oil Leak

[mvk24_imp]

I used the spray adhesive on the end plugs as well when i glued it to the VC, then wiped the excess/overspray off w laquer thinner after it was installed on the bike.


I tapped the pair valve port holes int he head with a 1/8 npt tap and put in shallow plugs. to that point, i no longer need the o ring seals there either. I don't like popping. to me popping = exhaust leak (because.. it basically is)

Smart idea

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca