07-14-2013, 11:43 PM
I installed the accessory headlight shell. The connectors can be sticky, but they will come out. Some of them are difficult to get the tabs compressed enough to release while still being able to pull on them. It's almost a 3-handed job. You might try "exercising" the tabs with a tiny screwdriver to make them more pliable. The connectors are pretty sturdy, as long as you aren't pulling on the wires you can't hurt anything.
Keep working on it; they will disconnect. BTW: if you don't have the shop manual, pay close attention to, or take a picture of, how the wiring loom lays out in the shell before you remove it. It will only go together one way and it's a tight fit.
Keep working on it; they will disconnect. BTW: if you don't have the shop manual, pay close attention to, or take a picture of, how the wiring loom lays out in the shell before you remove it. It will only go together one way and it's a tight fit.
