06-10-2015, 08:05 AM
Ok, here's a link for the pictures showing the disassembly. A couple of notes: I used a 90 degree offset phillips driver to access the 3 screws holding the back cover on and the 4 nuts were removed using a 10mm socket. The shop towels were to protect the finish while moving the parts around. I was able to tip the display forward to access the screws by temporarily re-fastening the headlight. This freed up just enough cable slack to let me reach all the screws. The 13 screws needed to release the cover were just the ones on the outside edges. The screws away from the outside were left alone. Once the 13 were unscrewed, the front cover pulled away without having to apply force.
https://flic.kr/s/aHskdUdZFp
https://flic.kr/s/aHskdUdZFp