08-13-2016, 12:08 AM
Yes that is where I get connectors for the bike.
The leads on the rear signals are supposed to be long enough to be routed properly back to the connector in the boot by the battery.
If you have a service manual the routing is in there. If not, PM me and I can help with that. Hopefully you bike harness isn't hacked up. I would look in the boot first and see what is going on. Sounds like he just cut the signal harness and put on bullet connectors.
You should be able to unplug it at the boot and route your new cable back to it and plug in.
The leads on the rear signals are supposed to be long enough to be routed properly back to the connector in the boot by the battery.
If you have a service manual the routing is in there. If not, PM me and I can help with that. Hopefully you bike harness isn't hacked up. I would look in the boot first and see what is going on. Sounds like he just cut the signal harness and put on bullet connectors.
You should be able to unplug it at the boot and route your new cable back to it and plug in.