02-03-2017, 09:01 PM
After you take off the bar ends you must remove the weight. See item 9 on the fiche : http://www.partzilla.com/parts/search/Ho...parts.html
It is held in with items 11 and 12. 12 will/may be destroyed when you remove the weight. The items hold it in pretty dang good.
How to get it out? When I got a throttle control kit for my ST it came with a long screw, a washer, and a basically piece of pipe an inch or two long. Hold pipe on handlebar end. Put washer on end of pipe. Put screw through washer and pipe into the weight. Then use the screw to pull the weight out as far as you can, then use your hands or pliers. Not hard really, but the clip, item 12 got ruined. New new rubber parts and the clip are cheap.
I would think you could find a socket that would fit and do the job.
It is held in with items 11 and 12. 12 will/may be destroyed when you remove the weight. The items hold it in pretty dang good.
How to get it out? When I got a throttle control kit for my ST it came with a long screw, a washer, and a basically piece of pipe an inch or two long. Hold pipe on handlebar end. Put washer on end of pipe. Put screw through washer and pipe into the weight. Then use the screw to pull the weight out as far as you can, then use your hands or pliers. Not hard really, but the clip, item 12 got ruined. New new rubber parts and the clip are cheap.
I would think you could find a socket that would fit and do the job.