08-12-2017, 05:35 AM
This morning I replaced all the brake and clutch fluid on my 2013 and 2014.
At the same time I installed all speed bleeders, using the stainless steel ones from Speed Bleeder .
The SB 8125 is the short one, no need for longer ones.
On the 2013 ABS model you need 5 bleeders because of the combined brakes rear/front.
On the non ABS and 2014 model 4 bleeders are needed.
The stainless steel ones are $15 each , normal ones are $7 each.
Fluids are easy to change using your air compressor and a brake fluid bleeder, only about $25/ $30 from Harbor Freight , this was the only thing I ever bought from Harbor Freight !
I use the vacuum method to empty the reservoirs and for the lines I use the speed bleeders.
At the same time I installed all speed bleeders, using the stainless steel ones from Speed Bleeder .
The SB 8125 is the short one, no need for longer ones.
On the 2013 ABS model you need 5 bleeders because of the combined brakes rear/front.
On the non ABS and 2014 model 4 bleeders are needed.
The stainless steel ones are $15 each , normal ones are $7 each.
Fluids are easy to change using your air compressor and a brake fluid bleeder, only about $25/ $30 from Harbor Freight , this was the only thing I ever bought from Harbor Freight !
I use the vacuum method to empty the reservoirs and for the lines I use the speed bleeders.