03-16-2018, 05:36 AM
Don’t have the manual in front of me and the attachment is too small (getting older...).
I’d start with your turn signals, trace the wires back to the connector. Check both sides of the wires on the connector, such that you have voltage going through it when you operate the turn signals.
Had a similar problem. Here’s more details.
http://cb1100forum.com/forum/showthread.php?tid=11220
I’d start with your turn signals, trace the wires back to the connector. Check both sides of the wires on the connector, such that you have voltage going through it when you operate the turn signals.
Had a similar problem. Here’s more details.
http://cb1100forum.com/forum/showthread.php?tid=11220