Posts: 14
Threads: 4
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2013
Hey Forum founder, and moderator,
A huge copyright violation in this thread. It's on your site and you are not going to do anything about it? Not even delete it?
Your defense that you didn’t know ends here.
Some guy buys a 12000 USD M/C and can’t afford a manual? WTF?
Mike
Posts: 2,542
Threads: 125
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2013
Mike,
I looked into things and removed the copyrighted material accordingly – sorry guys, but scans of the manual or other copyrighted material are off limits here.
As for your post, if you were really concerned about copyright infringement (which I do respect), a PM would have been a better choice as there is no guarantee that either ferret or myself will review every single thread here. So thanks for the warning, but next time I could definitely do without the attitude.
Guth
Posts: 319
Threads: 26
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2013
In this case, I am proud to be a member of this forum that would have me as a member.
Posts: 23,466
Threads: 697
Likes Received: 572 in 258 posts
Likes Given: 752
Joined: Apr 2025
We could tell someone a value if they ask, we just can't show copied pages from copyrighted materials.
Posts: 104
Threads: 16
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2013
(08-05-2013, 11:11 AM)The ferret_imp Wrote: We could tell someone a value if they ask, we just can't show copied pages from copyrighted materials.
Ferrets right, the specs are not copyrighted. The manual is. If anyone needs manual info just pm me.
Posts: 3
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
(08-04-2013, 02:55 PM)Guth_imp Wrote: Mike,
I looked into things and removed the copyrighted material accordingly – sorry guys, but scans of the manual or other copyrighted material are off limits here.
As for your post, if you were really concerned about copyright infringement (which I do respect), a PM would have been a better choice as there is no guarantee that either ferret or myself will review every single thread here. So thanks for the warning, but next time I could definitely do without the attitude.
Guth
Well Said!
Posts: 17
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2013
Can someone tell me the motor mount torque specs? I am installing the SW Motech crash bars on a 2013.
Posts: 128
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2013
(05-03-2014, 06:29 AM)zachamo_imp Wrote: Can someone tell me the motor mount torque specs? I am installing the SW Motech crash bars on a 2013.
Tyke57nz Wrote:
(12-26-2013 03:19 AM)Kiwikevin Wrote: Hi Tyke57NZ
Torques for the 4X "through frame" bolts / nuts is 49Nm.
I got my manual from here
http://www.sell.com/2G7335
Hi Kiwikevin
Thanks for that info, I assumed the 2 x through bolts for the Engine to mounting plate would be the same, would you mind looking those up for me. I will have to set up a Pay Pal account to purchase that manual but I will get onto that later.
Where in NZ are you?
Cheers
Yes torques are the same for the 4 bolts that go through the frame. The other 2 (1 each side) that go through the front engine bracket/s are 59Nm.
Hope this helps.
Posts: 56
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2019
Is there a list anywhere of all of the torque settings for the CB1100?
The numbers aren't copyrighted
Posts: 7,074
Threads: 94
Likes Received: 575 in 312 posts
Likes Given: 955
Joined: Apr 2025
(03-04-2019, 11:49 PM)spartanheed_imp Wrote: Is there a list anywhere of all of the torque settings for the CB1100?
The numbers aren't copyrighted
Some time ago somebody already inquired about this torque, I am at work now and have no access to my service manual....perhaps other members?? or wait till pm, sorry
