Honda carrier

[the lodger_imp]

Does anyone know if a Honda carrier for a Cb1100 EX SAE ( which I think is the wire wheel version roughly 2013 to 2016 ) will also fit a Honda cb1100 A-D , 2013 cast wheel ?

Many thanks

 

[pkrich_imp]

yes pretty sure all the rack are the same i fitted one from 2015 model to my 2017 rs no probs

pete

 

[apex1_imp]

yes pretty sure all the rack are the same i fitted one from 2015 model to my 2017 rs no probs

pete

This is interesting to know since the Honda part number for the 2017 and later rack is different than for the pre-2017 rack. I got my 2017 rack from samurider since at the time I bought it last summer, my U.S. dealer said they could not even get one for me.

 

[peterbaron]

Cautiously would say 2010to 2016 same OEM rear rack, 2017 definitely different

 

[Lord Popgun]

PB, they aren't exactly the same. The '13 rack has tubular cross pieces the '14 is flat pieces. The '14 may have a slight different mounting angle, but I don't remember details on that. It's on the board somewhere though.

 

[peterbaron]

OK, I transferred my tubular OEM from ‘13 onto my newer’14 model, and fits perfectly without any modifications. Base on this, I presented my opinion . :beerchug:

 

[pkrich_imp]

i should of said i bought the rack and was told it was from a 2015 so could be different if the one i bought came from a later model

 

[Lord Popgun]

PB, I’m good! We’re good! To tell the truth the rack fitting across models is confusing.

 

[Cormanus]

The question for US members is whether a DLX rack will fit a standard. I thought there may have been a difference.

 

[Desert viper_imp]

When I bought mine from Takeshi for my 14 deluxe it was a different part number from standard

 

[Lord Popgun]

Cormanus, check out this post: Honda Rack Install

Explains the DLX vs standard rack mounting angle.

 

[Redbird_imp]

Check out the mounting instructions: http://powersports.honda.com/documentum/MW01/08L70-MGC-A40.pdf
To me it looks like this rack can be mounted on either the standard or the DLX. There are some extra mounting bits that are used for the DLX that are not used for the standard. Looks like the bits are called the "garnish".

 

[Cormanus]

Thank you popgun and Redbird—good to see you by the way.

 

[the lodger_imp]

Gentlemen

Thank you for the very helpful information. Unfortunately I have come to the conclusion that the rack I have seen for sale , advertised as fitting a cb1100 EX-SAE
will not fit my cb1100 A-D. The reason is that the rack is wider front and rear , than the version that would fit my bike. I say this based on some measurements the vendor kindly supplied. Does this sound right , i.e that for the third model cb1100 sold in the UK, Honda for some reason widened the rear of the bike, where the rack fits?

Cheers

 

[Lord Popgun]

Could be. May be different garnish or seat rail. Something like that.

 

[peterbaron]

Gentlemen

Thank you for the very helpful information. Unfortunately I have come to the conclusion that the rack I have seen for sale , advertised as fitting a cb1100 EX-SAE
will not fit my cb1100 A-D. The reason is that the rack is wider front and rear , than the version that would fit my bike. I say this based on some measurements the vendor kindly supplied. Does this sound right , i.e that for the third model cb1100 sold in the UK, Honda for some reason widened the rear of the bike, where the rack fits?

Cheers

I'd like to see this particular rack's pic, please.

 

[the lodger_imp]

Here is the ebay reference to the rack for sale

eBay uk item number:293059028791

cheers

 

[pkrich_imp]

that rack looks just like mine but the spacers in the fitting kit are shorter

 

[peterbaron]

Gentlemen

Thank you for the very helpful information. Unfortunately I have come to the conclusion that the rack I have seen for sale , advertised as fitting a cb1100 EX-SAE
will not fit my cb1100 A-D. The reason is that the rack is wider front and rear , than the version that would fit my bike. I say this based on some measurements the vendor kindly supplied. Does this sound right , i.e that for the third model cb1100 sold in the UK, Honda for some reason widened the rear of the bike, where the rack fits?

Cheers

I'd like to see this particular rack's pic, please.

I'd like to see this particular rack's pic, please.
That looks to me like 2013, possible 2010-2013 OEM kit.
To avoid surprise, always check if part # matches your model, if you can.

 

[GoldOxide_imp]

No-name rack from japan.webike.net worked just fine on '14 CB1100A.