Login

TCBronson_imp · 09-20-2016, 04:47 PM

Has anyone tried to remove the black finish on the wheels, lower forks or engine? If so how hard is it to do. OR buy new Deluxe wheels, lower forks and side covers. I like the silver look better.

Lord Popgun · 09-20-2016, 09:17 PM

Acetone? Actually I don't know, but buying new wheels, etc. is going to be EXPENSIVE! Selling the old ones would recoup some money though.

kennyw · 09-20-2016, 10:43 PM

Or look in the classifieds or ebay for decent used wheels.

WhiskeyUSMC1979_imp · 09-21-2016, 02:08 AM

You could look into Vapor Blasting for the wheels and fork lowers. If it is just the engine covers you want non-black, I would buy replacement covers. If you want a full silver engine, Vapor Blasting could also work, but tear down and rebuild could be expensive/time consuming. Good luck and do what makes you happy and makes the bike yours.

Sent from an undisclosed location

PowerDubs_imp · 09-21-2016, 11:33 AM

How about just using paint stripper to remove the existing finish, then buff or polish to whatever surface finish you want then clear coat?

uscgmac_imp · 09-21-2016, 06:14 PM

I wouldn't bother, not worth the time or effort and if you mess it up no turning back. Just sell bike and buy another without the black if it bothers you that much

Sent from my SM-G530T using Tapatalk

Rocky_imp · 09-21-2016, 09:23 PM

(09-21-2016, 06:14 PM)uscgmac_imp Wrote: I wouldn't bother, not worth the time or effort and if you mess it up no turning back. Just sell bike and buy another without the black if it bothers you that much

Sent from my SM-G530T using Tapatalk

I have to agree. This is what I thought when I read the first post, but it's your bike to do with as you wish.
Unless you're very lucky and very skilled, I fear you may be heading down a path of deep regret.
Once you start there is no turning back so think of this very carefully before you do anything.

TCBronson_imp · 09-22-2016, 02:21 AM

(09-21-2016, 09:23 PM)Rocky_imp Wrote:
(09-21-2016, 06:14 PM)uscgmac_imp Wrote: I wouldn't bother, not worth the time or effort and if you mess it up no turning back. Just sell bike and buy another without the black if it bothers you that much

Sent from my SM-G530T using Tapatalk

I have to agree. This is what I thought when I read the first post, but it's your bike to do with as you wish.
Unless you're very lucky and very skilled, I fear you may be heading down a path of deep regret.
Once you start there is no turning back so think of this very carefully before you do anything.

I have to agree. This is what I thought when I read the first post, but it's your bike to do with as you wish.
Unless you're very lucky and very skilled, I fear you may be heading down a path of deep regret.
Once you start there is no turning back so think of this very carefully before you do anything.
Good advice and I agree. I don't own a CB1100 yet but want to buy one. The local dealer has a 2014 black and I was thinking about buying it and removing the black. I will just keep looking for a red bike. Prefer the Deluxe.

0011bc_imp · 09-22-2016, 02:36 AM

Rust. Rust. Rust.

PowerDubs_imp · 09-22-2016, 02:48 AM

Aluminum does not rust.

Oxidize? Sure, but that is not the same.

Sent from my iPhone using Tapatalk

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	valve stem replacement without removing tyre	max	5	410	01-08-2021, 10:46 AM Last Post: peterbaron
	Exhaust coating Jet-Hot Chrome finish	Brady Bourgeois_imp	12	848	08-04-2020, 03:42 AM Last Post: peterbaron
	Removing stock rack on 2014	quiffy_imp	10	571	05-17-2020, 01:23 PM Last Post: Cormanus
	Stripping black finish off of 2017 engine case and cylinders	Greaseball_imp	9	617	09-12-2019, 09:59 AM Last Post: pekingduck
	Advice for removing emblems on side covers	misterprofessionality	26	1,661	05-01-2018, 07:28 AM Last Post: PowerDubs_imp
	Removing stock mufflers?	Rebel73_imp	24	1,208	02-19-2016, 03:52 PM Last Post: Rebel73_imp
	Black Finish on Rims Question	Steverino_imp	1	202	01-18-2016, 12:10 PM Last Post: Carguy1959_imp
	Removing reflectors from fork sliders	Buffalorider_imp	11	544	03-07-2015, 09:22 PM Last Post: twiin640_imp
	Removing badges from side panels	pechorin75_imp	11	550	03-08-2014, 10:32 AM Last Post: Lord Popgun

Threaded Mode removing black finish
Author	Message