Posts: 54
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2014
Hi Everyone,
I have a Dynojet AutoTune AT-200 which comes with a BOSCH O2 Wideband Sensor ( M18 Thread ). Unfortunately our Bikes use M12. I have an aftermarket Titanium Header (MotoGear Black Ti from Mr. T) and really would like to avoid welding a M18 Bung, which obviously would be a pain ... Just think about TI Welding and Black paint ..... Yikes
Does anyone know if the Arrows Header has a M12 or M18 for the O2 Sensor
thank you very much in advance
Posts: 44
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2013
(06-23-2015, 02:39 AM)mjezek_imp Wrote: Hi Everyone,
I have a Dynojet AutoTune AT-200 which comes with a BOSCH O2 Wideband Sensor ( M18 Thread ). Unfortunately our Bikes use M12. I have an aftermarket Titanium Header (MotoGear Black Ti from Mr. T) and really would like to avoid welding a M18 Bung, which obviously would be a pain ... Just think about TI Welding and Black paint ..... Yikes
Does anyone know if the Arrows Header has a M12 or M18 for the O2 Sensor
thank you very much in advance
hey mate the arrow headers have a 12mm , i welded a 18 adapter for the auto tune onto the pipes and all good , you will be very happy with these pipes cheers rod
Posts: 54
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2014
(06-23-2015, 08:02 AM)rmack_imp Wrote: (06-23-2015, 02:39 AM)mjezek_imp Wrote: Hi Everyone,
I have a Dynojet AutoTune AT-200 which comes with a BOSCH O2 Wideband Sensor ( M18 Thread ). Unfortunately our Bikes use M12. I have an aftermarket Titanium Header (MotoGear Black Ti from Mr. T) and really would like to avoid welding a M18 Bung, which obviously would be a pain ... Just think about TI Welding and Black paint ..... Yikes
Does anyone know if the Arrows Header has a M12 or M18 for the O2 Sensor
thank you very much in advance
hey mate the arrow headers have a 12mm , i welded a 18 adapter for the auto tune onto the pipes and all good , you will be very happy with these pipes cheers rod
hey mate the arrow headers have a 12mm , i welded a 18 adapter for the auto tune onto the pipes and all good , you will be very happy with these pipes cheers rod
Super, thanxs for the quick response, but it was not the answer i hoped for .... LOL
I guess, buying a Ti M18 Bung and sending the mid-pipe to a welding specialist for titanium is the solution ... Yikes and Ouch ... good times
