Login

Todd_K_imp · 05-31-2014, 12:38 AM

Just received a set of Honda engine guards and want to confirm what I got is correct. Normally, the two sides match in form - these are different in shape and mounting points.

If someone can confirm they are mismatched, I'll just return them without wasting time test fitting.

Thanks!

furious_blue_imp · 05-31-2014, 12:46 AM

(05-31-2014, 12:38 AM)Todd_K_imp Wrote: Just received a set of Honda engine guards and want to confirm what I got is correct. Normally, the two sides match in form - these are different in shape and mounting points.

If someone can confirm they are mismatched, I'll just return them without wasting time test fitting.

Thanks!

Those look like the correct set. I also was a little puzzled when I opened the shipping box and got an un-symmetrical pair.

The guards fit pretty close to the engine cases, so each side is shaped so that they fit the different contours of the left and right sides of the engine case.

Todd_K_imp · 05-31-2014, 12:49 AM

Thanks for confirming, FB. The shape threw me, along with the different mounting points. And like you mentioned, the closeness to the cases, especially on the left side.

Appreciate the assist!

(05-31-2014, 12:46 AM)furious_blue_imp Wrote:
(05-31-2014, 12:38 AM)Todd_K_imp Wrote: Just received a set of Honda engine guards and want to confirm what I got is correct. Normally, the two sides match in form - these are different in shape and mounting points.

If someone can confirm they are mismatched, I'll just return them without wasting time test fitting.

Thanks!

Those look like the correct set. I also was a little puzzled when I opened the shipping box and got an un-symmetrical pair.

The guards fit pretty close to the engine cases, so each side is shaped so that they fit the different contours of the left and right sides of the engine case.

Those look like the correct set. I also was a little puzzled when I opened the shipping box and got an un-symmetrical pair.

The guards fit pretty close to the engine cases, so each side is shaped so that they fit the different contours of the left and right sides of the engine case.

ride4now_imp · 05-31-2014, 11:27 AM

How were they to install?
The ones I ordered came in and I'm planning on picking them up
next weekend. I was thinking of having the dealer install them, but if
they're not to difficult, I might just do it myself.

Todd_K_imp · 05-31-2014, 12:41 PM

Install wasn't bad at all. Biggest hurdle was overcoming the bonehead move of not realizing the frame bolt had a nut on the other end. It's so obvious that I just missed it. Sat there wrenching on it wondering why it wasn't getting any looser Angry

Need two 14mm wrenches for the frame nut and bolt, and 10mm & 8mm wrenches for the lower mounting nut and bolt. If its any indication of the skill needed, the most difficult parts were breaking the engine bolt loose and getting it out of the frame, followed by reinstalling it. A plastic deadblow hammer works well for this.

Barely perceptible farkle..

CB4ME_imp · 05-31-2014, 10:28 PM

Love your bike and that Suzuki thumper in the background. Agreed Honda's crash bar is very nicely done.

Todd_K_imp · 06-01-2014, 06:09 AM

Thanks! I'm really enjoying the bike, blacked out engine and all. Nearly 400 miles now, so the revs can start climbing a bit.

Red Mist_imp · 06-01-2014, 08:57 AM

Does your left hang lower than your right? They are correct as already stated. ROFL

Todd_K_imp · 06-01-2014, 11:27 AM

(06-01-2014, 08:57 AM)Red Mist_imp Wrote: Does your left hang lower than your right? They are correct as already stated.

With the hot weather we're having, hard to say!

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Foolish or Reasonable: R&G Oil Cooler Guard	rdprdp01	2	443	04-14-2025, 05:16 PM Last Post: deuce17EX
	Foolish or Reasonable: R&G Oil Cooler Guard	rdprdp01	11	934	04-11-2025, 02:41 PM Last Post: rdprdp01
	Tank Guard Options	Yata-Garasu_imp	11	693	05-18-2022, 08:11 AM Last Post: Lord Popgun
	Front Fender Splash Guard	Wagonpeddler_imp	26	1,611	03-03-2022, 05:45 PM Last Post: jtopiso_imp
	Brake lever guard for track days	mrded_imp	17	1,211	05-26-2021, 07:50 PM Last Post: mrded_imp
	PLOT Chain Guard	KiowaEagle_imp	14	1,079	09-30-2020, 12:31 PM Last Post: tod.branko_imp
	we know this engine guard ?	alprider	1	294	06-27-2020, 07:32 AM Last Post: Cormanus
	Oil Cooler Guard	Chris Goldson_imp	10	855	11-09-2017, 11:41 AM Last Post: Dvassino_imp
	SW-MOTECH Engine Guard	17-CB-002	4	452	08-03-2017, 07:13 PM Last Post: Rocky_imp
	Engine Guard	ajacobspilot_imp	3	343	04-10-2017, 10:11 PM Last Post: Obleo

Threaded Mode OEM engine guard question
Author	Message