Login

Nemo_imp · 08-18-2019, 07:14 AM

I swapped my exhaust for a Nojima megaphone and lost my center stand stop. Do you know if there is an aftermarket accessory to create a new stop?

Looking forward to your recommendations.

chync_imp · 08-18-2019, 07:21 AM

I used a metal hose clamp on the muffler. I aligned the screw head of the clamp to a position that allowed it to act as the stop.

Sent from my iPhone using Tapatalk

JLEECB · 08-18-2019, 07:38 AM

Which model is your cb1100? I have after market stopper for sale for a 2013. My bike is a 2014 so I had to order an updated one for yoshimura.

http://cb1100forum.com/forum/showthread.php?tid=14617

Nemo_imp · 08-18-2019, 09:13 AM

(08-18-2019, 07:38 AM)JLEECB_imp Wrote: Which model is your cb1100? I have after market stopper for sale for a 2013. My bike is a 2014 so I had to order an updated one for yoshimura.

http://cb1100forum.com/forum/showthread.php?tid=14617

Mine’s a 14.

JLEECB · 08-18-2019, 09:21 AM

This thread they modified the 2013 stopper for a 2014 model.

http://cb1100forum.com/forum/showthread....ight=rs-3.

**Cormanus** · 08-18-2019, 10:24 AM

Hey, Nemo, when it's all done, how about a picture or two, please?

Nemo_imp · 08-18-2019, 10:59 AM

Crisis averted. The new exhaust (Nojima Megaphone) doesn't have the "ledge" where the center stand stops when tucked in, therefore, the center stand was going all the way up and resting on my chain.

I removed the rubber pad that made contact with the ledge and in the hole it left installed a 5" carriage bolt, one not to secure it and another to jam the first. Covered the bolt with heat shrink, and Loc-Tited a threaded rubber bushing on the tip of the bolt.

Now the bike has a new look and sound.

There's a flaw to my "under the mango tree" engineering but I hope it will withstand it.

Peace!

Razor · 08-18-2019, 11:01 AM

Hi Nemo, here’s a link that might give you some ideas.

http://cb1100forum.com/forum/showthread....=Yoshimura

p.s. sorry to hear you can’t make the rally. Hope to see you next year!
Looks like we posted about the same time.
Bike looks great!

Nemo_imp · 08-18-2019, 11:05 AM

Razor,

I would buy one of those whenever you have it ready.

We'll catch up next year. Have fun!

Razor · 08-18-2019, 11:11 AM

Sorry my friend. Only made one and didn’t jot down the measurements Blush

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Stand-alone ECU	TTRacer_imp	2	285	02-22-2024, 01:58 PM Last Post: TTRacer_imp
	Advice - carry water bottle and side stand plate?	4 Paws_imp	41	2,452	07-23-2022, 06:02 PM Last Post: rich_imp
	Yoshimura RS3 Install. 2013 Kit on a 2014 and sorted the center stand issue!	rdtshaw_imp	17	1,197	01-05-2022, 10:54 PM Last Post: Nibis_imp
	Pit Bull Rear Stand	Stichill_imp	7	584	05-02-2021, 04:45 AM Last Post: ampm7_imp
	Spools for pit stand.	kmoney_imp	12	1,369	03-25-2021, 12:09 PM Last Post: Obleo
	Dimotiv Side Stand Enlarger - 2017 EX fit	TXBikerGuy	5	593	08-08-2020, 09:48 AM Last Post: TXBikerGuy
	Shorty pipe and center stand	domeular_imp	53	3,415	10-28-2019, 02:10 AM Last Post: GoldOxide_imp
	side stand foot for 2017	Houtman_imp	7	602	09-17-2019, 08:13 AM Last Post: Houtman_imp
	Center stand mod for Yoshimura system	Razor	9	704	09-06-2019, 05:20 AM Last Post: Nemo_imp
	Kick Stand Pad - anyone else use one accassionally?	Doug Shepard_imp	26	1,771	02-26-2019, 10:12 AM Last Post: the Ferret

Threaded Mode Center stand stop
Author	Message