+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Center stand stop (/showthread.php?tid=8520)
Pages:
1
2
Center stand stop - Nemo_imp - 08-18-2019
I swapped my exhaust for a Nojima megaphone and lost my center stand stop. Do you know if there is an aftermarket accessory to create a new stop?
Looking forward to your recommendations.
Center stand stop - chync_imp - 08-18-2019
I used a metal hose clamp on the muffler. I aligned the screw head of the clamp to a position that allowed it to act as the stop.
Sent from my iPhone using Tapatalk
RE: Center stand stop - JLEECB - 08-18-2019
Which model is your cb1100? I have after market stopper for sale for a 2013. My bike is a 2014 so I had to order an updated one for yoshimura.
http://cb1100forum.com/forum/showthread.php?tid=14617
RE: Center stand stop - Nemo_imp - 08-18-2019
(08-18-2019, 07:38 AM)JLEECB_imp Wrote: Which model is your cb1100? I have after market stopper for sale for a 2013. My bike is a 2014 so I had to order an updated one for yoshimura.
http://cb1100forum.com/forum/showthread.php?tid=14617
Mine’s a 14.
RE: Center stand stop - JLEECB - 08-18-2019
This thread they modified the 2013 stopper for a 2014 model.
http://cb1100forum.com/forum/showthread.php?tid=4020&highlight=rs-3.
RE: Center stand stop - Cormanus - 08-18-2019
Hey, Nemo, when it's all done, how about a picture or two, please?
RE: Center stand stop - Nemo_imp - 08-18-2019
Crisis averted. The new exhaust (Nojima Megaphone) doesn't have the "ledge" where the center stand stops when tucked in, therefore, the center stand was going all the way up and resting on my chain.
I removed the rubber pad that made contact with the ledge and in the hole it left installed a 5" carriage bolt, one not to secure it and another to jam the first. Covered the bolt with heat shrink, and Loc-Tited a threaded rubber bushing on the tip of the bolt.
Now the bike has a new look and sound.
There's a flaw to my "under the mango tree" engineering but I hope it will withstand it.
Peace!
RE: Center stand stop - Razor - 08-18-2019
Hi Nemo, here’s a link that might give you some ideas.
http://cb1100forum.com/forum/showthread.php?tid=4246&highlight=Yoshimura
p.s. sorry to hear you can’t make the rally. Hope to see you next year!
Looks like we posted about the same time.
Bike looks great!
RE: Center stand stop - Nemo_imp - 08-18-2019
Razor,
I would buy one of those whenever you have it ready.
We'll catch up next year. Have fun!
RE: Center stand stop - Razor - 08-18-2019
Sorry my friend. Only made one and didn’t jot down the measurements
