Login

peterbaron · 01-14-2019, 08:06 AM

Chuckk, what do you use, Imgur???, if yes, follow post #19

GoldOxide_imp · 01-14-2019, 11:59 AM

Welcome aboard the Forum Chuckk! To be sure, when not elsewhere, you will be here.

Chuckk_imp · 01-14-2019, 12:39 PM

thank you guys, for the welcome.. I may try to send pics later..

peterbaron · 01-15-2019, 10:17 AM

(01-14-2019, 12:39 PM)Chuckk_imp Wrote: thank you guys, for the welcome.. I may try to send pics later..

THIS POST BELONGS TO CHUCKK, I just edit his pics, if any questions, address'em to Chuckk
Here he goes::

Here are some pics of center stand project..

[Image: 6bee2e177a78668592bc58dde2151dda.jpg]

[Image: 6bee2e177a78668592bc58dde2151dda.jpg]

[Image: 245697a2cb7378c26d0985abf2d84a41.jpg]

while I was at the muffler shop, I had the guy weld the nut to the center stand ..

[Image: 50190ca13171a822dd58331eb5a32fe8.jpg]

[Image: 8226041a984cfa179b22d98fd9e76a6b.jpg]

...a teflon pad attached to the swingarm

[Image: 9a93ae415f5c8e36721a6390297e08db.jpg]

[Image: 35866a2a17dc4bcfe2df3fdd3318db4a.jpg]

it was a little noisy so I replaced it with hard rubber.. I removed the magnet after finding out the additional weight caused a problem .. it over taxed the restoring spring..

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

[Image: 9fbf2d4c5faeb282ef4bdccfe5e2fc99.jpg]

[Image: 9fbf2d4c5faeb282ef4bdccfe5e2fc99.jpg]

[Image: 59bdd3e11c90dd718da2dcab2c7c3b69.jpg]

took the bike into the muffler shop to have the two short header extensions made to accommodate the emgo shorty reverse mufflers.. I have repacked the shorties already..

[Image: 8c6bff4c774308bf3bff1ec286ded312.jpg]

[Image: 8c6bff4c774308bf3bff1ec286ded312.jpg]

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Here is some other project::

[Image: 0e8f962641e4a8fff2aee7ca339d4df5.jpg]

[Image: 6a48fee6c7b47182e18b487a6e7463a4.jpg]

[Image: 8bf993d3189ff06b31675f80d182b94e.jpg]

[Image: b1a81d564bdf8187345257b126f1407f.jpg]

>>>>>>>>>>>>>>
<<<<<<<<<<<<<<

Chuckk >> please excuse any errors...

GoldOxide_imp · 01-15-2019, 10:20 AM

Nice staging Chuckk / PB.

the Ferret · 01-15-2019, 10:54 AM

good night what a thorough project. That's why I don't try and make things. Don't have those kind of skills!

Chuckk_imp · 01-15-2019, 11:03 AM

(01-15-2019, 10:17 AM)peterbaron_imp Wrote:
(01-14-2019, 12:39 PM)Chuckk_imp Wrote: thank you guys, for the welcome.. I may try to send pics later..

THIS POST BELONGS TO CHUCKK, I just edit his pics, if any questions, address'em to Chuckk
Here he goes::

Here are some pics of center stand project..

while I was at the muffler shop, I had the guy weld the nut to the center stand ..

...a teflon pad attached to the swingarm

it was a little noisy so I replaced it with hard rubber.. I removed the magnet after finding out the additional weight caused a problem .. it over taxed the restoring spring..

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

took the bike into the muffler shop to have the two short header extensions made to accommodate the emgo shorty reverse mufflers.. I have repacked the shorties already..

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Here is some other project::

>>>>>>>>>>>>>>
<<<<<<<<<<<<<<

Chuckk >> please excuse any errors...

THIS POST BELONGS TO CHUCKK, I just edit his pics, if any questions, address'em to Chuckk
Here he goes::

Here are some pics of center stand project..

[Image: 24fa8a1de1b17ef0306b4b916f6e9179.jpg]

[Image: 24fa8a1de1b17ef0306b4b916f6e9179.jpg]

[Image: 587d1f60e229786c8d4933be6cc75199.jpg]

while I was at the muffler shop, I had the guy weld the nut to the center stand ..

[Image: 9c77cfb67203c16aa366ba19dc033a95.jpg]

[Image: da8fbefac5f215153cb6bf3b60926fc4.jpg]

...a teflon pad attached to the swingarm

[Image: 3365c95a7d9a5f2424183e8b71baf2dc.jpg]

[Image: 3c5c6791fad7e705ad547ed198fea55b.jpg]

it was a little noisy so I replaced it with hard rubber.. I removed the magnet after finding out the additional weight caused a problem .. it over taxed the restoring spring..

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

[Image: c50888fc2ef7a61113ea372b3cd455ea.jpg]

[Image: c50888fc2ef7a61113ea372b3cd455ea.jpg]

[Image: e50e8b7a3dac0cf0ee2d3d72868619e2.jpg]

took the bike into the muffler shop to have the two short header extensions made to accommodate the emgo shorty reverse mufflers.. I have repacked the shorties already..

[Image: c8c9f5d32f8e55faae5896976c0d8c69.jpg]

[Image: c8c9f5d32f8e55faae5896976c0d8c69.jpg]

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Here is some other project::

[Image: bd6543a9789f8b76ee0662d73f5074cf.jpg]

[Image: 93edb9eec78c424773fb95a60e5b4c9f.jpg]

[Image: e32d1ae5b90f19a352770d7d0a6550c3.jpg]

>>>>>>>>>>>>>>
<<<<<<<<<<<<<<

Chuckk >> please excuse any errors...
Cool

thanks Peter for all of your help posting the pics.. chuck j.

domeular_imp · 03-05-2019, 01:37 PM

(01-09-2019, 12:36 PM)Frulk_imp Wrote: Let us know how you like that new exhaust once you have it on the bike. Just from the pics it looks LOUD!!!

I definitely will! I'm blacking out the bike, so I will post before and after photos when it's complete...or mostly complete. The shorty was the 1st thing I changed on the bike and I love the sound. My little brother just bought the exact same bike and is going to do it in glossy black and chrome. He's doing the chrome version of the same shorty. I will post photos when mine is ready.

Chuckk_imp · 03-06-2019, 01:36 AM

(03-05-2019, 01:37 PM)domeular_imp Wrote:
(01-09-2019, 12:36 PM)Frulk_imp Wrote: Let us know how you like that new exhaust once you have it on the bike. Just from the pics it looks LOUD!!!

I definitely will! I'm blacking out the bike, so I will post before and after photos when it's complete...or mostly complete. The shorty was the 1st thing I changed on the bike and I love the sound. My little brother just bought the exact same bike and is going to do it in glossy black and chrome. He's doing the chrome version of the same shorty. I will post photos when mine is ready.

I definitely will! I'm blacking out the bike, so I will post before and after photos when it's complete...or mostly complete. The shorty was the 1st thing I changed on the bike and I love the sound. My little brother just bought the exact same bike and is going to do it in glossy black and chrome. He's doing the chrome version of the same shorty. I will post photos when mine is ready.
my experience with running the two ergo shorties was, the sound wasn't a deep enough tone.. I repacked them and it made a nice difference.. the stock packing is kinda lacking .. I hope to send pics thru Peter.. I have also revised my magnet location for traffic signals as well as removing the teflon pad I mounted on the swing arm and replacing it with a solid rubber one that I made out of an old rubber foot peg.. nice and quiet now, when taking the bike off of the center stand .. Chuckk j.

peterbaron · 03-06-2019, 04:58 AM

(03-06-2019, 01:36 AM)Chuckk_imp Wrote:
(03-05-2019, 01:37 PM)domeular_imp Wrote:
(01-09-2019, 12:36 PM)Frulk_imp Wrote: Let us know how you like that new exhaust once you have it on the bike. Just from the pics it looks LOUD!!!

I definitely will! I'm blacking out the bike, so I will post before and after photos when it's complete...or mostly complete. The shorty was the 1st thing I changed on the bike and I love the sound. My little brother just bought the exact same bike and is going to do it in glossy black and chrome. He's doing the chrome version of the same shorty. I will post photos when mine is ready.

I definitely will! I'm blacking out the bike, so I will post before and after photos when it's complete...or mostly complete. The shorty was the 1st thing I changed on the bike and I love the sound. My little brother just bought the exact same bike and is going to do it in glossy black and chrome. He's doing the chrome version of the same shorty. I will post photos when mine is ready.
my experience with running the two ergo shorties was, the sound wasn't a deep enough tone.. I repacked them and it made a nice difference.. the stock packing is kinda lacking .. I hope to send pics thru Peter.. I have also revised my magnet location for traffic signals as well as removing the teflon pad I mounted on the swing arm and replacing it with a solid rubber one that I made out of an old rubber foot peg.. nice and quiet now, when taking the bike off of the center stand .. Chuckk j.

I definitely will! I'm blacking out the bike, so I will post before and after photos when it's complete...or mostly complete. The shorty was the 1st thing I changed on the bike and I love the sound. My little brother just bought the exact same bike and is going to do it in glossy black and chrome. He's doing the chrome version of the same shorty. I will post photos when mine is ready.
my experience with running the two ergo shorties was, the sound wasn't a deep enough tone.. I repacked them and it made a nice difference.. the stock packing is kinda lacking .. I hope to send pics thru Peter.. I have also revised my magnet location for traffic signals as well as removing the teflon pad I mounted on the swing arm and replacing it with a solid rubber one that I made out of an old rubber foot peg.. nice and quiet now, when taking the bike off of the center stand .. Chuckk j.
PICS EDIT FOR CHUCKK

[Image: 1d995d7660312b8d4d492cdeb52f44d1.jpg]

[Image: 1d995d7660312b8d4d492cdeb52f44d1.jpg]

[Image: a3a3b86b0a2727b2900c07f3fc933464.jpg]

[Image: 2457c9fa5d14247b1df6ed458e753ac1.jpg]

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Stand-alone ECU	TTRacer_imp	2	223	02-22-2024, 01:58 PM Last Post: TTRacer_imp
	Advice - carry water bottle and side stand plate?	4 Paws_imp	41	1,899	07-23-2022, 06:02 PM Last Post: rich_imp
	Moriwaki 4 into 1 full pipe	GS1100_imp	9	515	01-30-2022, 12:59 PM Last Post: rich_imp
	Yoshimura RS3 Install. 2013 Kit on a 2014 and sorted the center stand issue!	rdtshaw_imp	17	873	01-05-2022, 10:54 PM Last Post: Nibis_imp
	Pit Bull Rear Stand	Stichill_imp	7	460	05-02-2021, 04:45 AM Last Post: ampm7_imp
	Spools for pit stand.	kmoney_imp	12	1,149	03-25-2021, 12:09 PM Last Post: Obleo
	Intalled DCC 12" Stainless Steel reverse shorty exhaust	Garver_imp	10	679	10-13-2020, 03:00 AM Last Post: Garver_imp
	Dimotiv Side Stand Enlarger - 2017 EX fit	TXBikerGuy	5	468	08-08-2020, 09:48 AM Last Post: TXBikerGuy
	side stand foot for 2017	Houtman_imp	7	462	09-17-2019, 08:13 AM Last Post: Houtman_imp
	Center stand mod for Yoshimura system	Razor	9	544	09-06-2019, 05:20 AM Last Post: Nemo_imp

Threaded Mode Shorty pipe and center stand
Author	Message