+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Shorty pipe and center stand (/showthread.php?tid=8485)
Shorty pipe and center stand - domeular_imp - 01-07-2019
Hey everyone. I searched through the threads and didn't find an answer to this:
I was looking to install a shorty slip-on pipe but would like to keep my center stand. Does anyone have a solution (other than 'remove the center stand') to keep the center stand from hitting the chain? I've looked on webike, twisted throttle, samurider, etc but haven't found a device/mod/stopper that would restrict the stand from hitting the chain.
RE: Shorty pipe and center stand - the Ferret - 01-08-2019
Howdy and welcome to the forum.I seem to recall someone using a Delvic something or other with a little curved connector pipe.
Do a search for Delvic
RE: Shorty pipe and center stand - Cormanus - 01-08-2019
Welcome domeular.
RE: Shorty pipe and center stand - Lord Popgun - 01-08-2019
Delkevic
Try this: http://cb1100forum.com/forum/showthread.php?tid=8264&highlight=Delkevic
RE: Shorty pipe and center stand - GoldOxide_imp - 01-08-2019
Welcome to the Forum domeular. I hope you find what you are looking for. Also, when not elsewhere, you will be here.
RE: Shorty pipe and center stand - iamheero_imp - 01-08-2019
I didn't have to remove the center stand with my Yoshi slip-on on my '14 and my Pipemaster 4-4 has it as well.
RE: Shorty pipe and center stand - Cormanus - 01-08-2019
Interesting, iamheero. I thought it (the centre stand) was a goner with the Pipemasters' system.
RE: Shorty pipe and center stand - domeular_imp - 01-08-2019
Thanks for the responses, everyone. Here is the link to the shorty I'll be using.
[url=https://www.amazon.com/gp/product/B076ZX76YG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1]https://www.amazon.com/gp/product/B076ZX...UTF8&psc=1
RE: Shorty pipe and center stand - misterprofessionality - 01-08-2019
Domelar,
Just got done installing a Slip-on exhaust, but before I did, i ran it with an open header just to see what it sounded like...it seems like the pipe you're looking at is going to sound something like that. Pretty savage dude !
RE: Shorty pipe and center stand - Townie_imp - 01-08-2019
The Yoshimura RS3 slip-on for the CB1100 requires a separate centerstand bracket.
Have a look at Frulk's post:
http://cb1100forum.com/forum/showthread.php?tid=13597&pid=221739
You can order the Yosh centerstand bracket separately. This may work for you.
I believe there are differences in the RS3 for 2013 & 2014 CB1100, just something to be aware of.