Login

Ale72_imp · 12-27-2019, 01:45 AM

Hello everyone, i would like to install 20 cm handlebar risers on my cb 1.100 ex 2017, can you confirm that there are no problems with the cables? if someone has already done so, can you give me your impressions?
thank you.

Ben70_imp · 12-27-2019, 02:18 AM

If I am correct that 20cm is a bit over 7 in, then yes, you would have a problem. 1 inch is no problem, 2 is questionable.

Ben

Houtman_imp · 12-27-2019, 07:48 AM

(12-27-2019, 01:45 AM)Ale72_imp Wrote: Hello everyone, i would like to install 20 cm handlebar risers on my cb 1.100 ex 2017, can you confirm that there are no problems with the cables? if someone has already done so, can you give me your impressions?
thank you.

Did you mean 20 mm ?

Ale72_imp · 12-27-2019, 07:50 AM

(12-27-2019, 07:48 AM)Houtman_imp Wrote:
(12-27-2019, 01:45 AM)Ale72_imp Wrote: Hello everyone, i would like to install 20 cm handlebar risers on my cb 1.100 ex 2017, can you confirm that there are no problems with the cables? if someone has already done so, can you give me your impressions?
thank you.
Did you mean 20 mm ?

Did you mean 20 mm ? Yes 20 mm not 20 cm sorry

lash_imp · 12-27-2019, 08:26 AM

I used 2 inch/50mm Rox Risers on mine and they worked with the stock cables..

peterbaron · 12-27-2019, 08:32 AM

Lash, how is your CB stable, any new arrivals???

jimgl3_imp · 12-27-2019, 09:31 AM

mine are 1 and a half or 2 inch, can't recall for sure. ended up freeing the lines from the bolt that keeps the brake lines fastened in place (where the lines make a "Y") to provide some stress relief on the lines. haven't had any issues with it this way.

lash_imp · 12-27-2019, 12:21 PM

Peter, last winters project, another 69 rescue bike.. still have all the others.. Big Grin

GoldOxide_imp · 12-27-2019, 12:28 PM

Jeez Lash - that is ultra sweet! Worship

Where were you during BigSheep's Southern Ontario Rally this year? It would have been awesome to worship this thing of beauty.

peterbaron · 12-27-2019, 12:30 PM

(12-27-2019, 12:21 PM)lash_imp Wrote: Peter, last winters project, another 69 rescue bike.. still have all the others..

Jeeeeeez... MUST visit you again in 2020 season Big Grin

So now, you have 750cc full set of colours and models, correct???
Any CBX or old GW???
Banana

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Quad Lock handlebar vs clutch perch and bar-end mirrors	Uncle Sixer	1	231	01-04-2026, 01:26 PM Last Post: pekingduck
	Handlebar control symmetry	Uncle Sixer	17	1,225	08-07-2025, 05:24 AM Last Post: Cormanus
	Handlebar Risers??	bubblerboy64_imp	16	1,078	07-16-2022, 06:04 AM Last Post: calipo223_imp
	What to do with the handlebar mounts when converting to clip-on controls?	misterprofessionality	7	497	04-08-2022, 03:41 AM Last Post: misterprofessionality
	CB 1100 EX Handlebar original or other?	MALACAY_imp	4	398	04-03-2022, 01:00 AM Last Post: Cormanus
	Handlebar from 919	motorider6_imp	10	665	05-27-2021, 12:47 PM Last Post: Stichill_imp
	CRF1000 handlebar	mspaansnl_imp	0	169	05-25-2021, 04:57 AM Last Post: mspaansnl_imp
	USB ON HANDLEBAR - connection at battery direct .	Alfgaxatico_imp	32	1,643	01-20-2021, 10:42 PM Last Post: GoldOxide_imp
	HANDLEBAR RISERS - is really necessary???	Alfgaxatico_imp	19	1,044	12-16-2020, 10:40 PM Last Post: GoldOxide_imp
	Early 80’s handlebar clamp	PowerDubs_imp	33	1,525	10-10-2020, 02:36 AM Last Post: Gordo_imp

Threaded Mode Handlebar riser
Author	Message