The CB1100 Community Forum › Honda CB1100 Discussions › Mechanical & Technical v
Squealing when pulling clutch

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
Squealing when pulling clutch
itstuantran_imp Offline
Running Like a Top
Posts: 91
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2017
#1
11-14-2017, 12:38 PM
Mine is RS 2017 and recently i have had squealing sound every time pulling clutch for gear change. I have lubricated the bolt but no luck. Anyone having the same problem and how to solve it. Thanks
Find
Reply
the Ferret Offline
Road Warrior
Posts: 23,490
Threads: 697
Likes Received: 620 in 277 posts
Likes Given: 789
Joined: Apr 2025
#2
11-14-2017, 02:39 PM
hmm there should be no reason to squeal, it's hydraulic. Does it do it with the motor off? or just when the motor is running? What did you lubricate the pivot with?
Find
Reply
alprider Offline
Road Warrior
Posts: 1,186
Threads: 92
Likes Received: 143 in 40 posts
Likes Given: 0
Joined: May 2025
#3
11-14-2017, 05:11 PM
Hmm if i remember right somebody put some WD40 by on the hand-lever there. And it was good after.... and a bit l have too the same sound by my DLX until now and not at the new EX
Find
Reply
the Ferret Offline
Road Warrior
Posts: 23,490
Threads: 697
Likes Received: 620 in 277 posts
Likes Given: 789
Joined: Apr 2025
#4
11-15-2017, 12:54 AM
WD 40 is a short term fix for pivot squeal. Long term fix is to pull the blade, and pin, clean off the old stuff, apply a good quality grease like bearing grease and reassemble.

pics are gone but process is explained

http://www.cb1100forum.com/forum/showthr...p?tid=6755
Find
Reply
Wisedrum Offline
Road Warrior
Posts: 930
Threads: 9
Likes Received: 57 in 17 posts
Likes Given: 3
Joined: May 2025
#5
11-15-2017, 07:12 AM
When I did my summer trip in wet and rainy Scotland this year, the clutch lever started to squeal after a while. John helped me out with WD40 and it solved the problem. Being at home again I mounted foldable levers for each the brake and the clutch because I damaged one of it through a downfall of the bike. They were mounted with a good portion of grease and never did an annoying sound since then. If they will do, I repeat the grease thing.

Wisedrum
Find
Reply
itstuantran_imp Offline
Running Like a Top
Posts: 91
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2017
#6
11-15-2017, 12:53 PM
Ferret, it's quealing either motor on or off. I have lubricated the pivot with Liqui chain lub.
Thanks for the info, i'll try it out on weekend.
(11-15-2017, 12:54 AM)The ferret_imp Wrote: WD 40 is a short term fix for pivot squeal. Long term fix is to pull the blade, and pin, clean off the old stuff, apply a good quality grease like bearing grease and reassemble.

pics are gone but process is explained

http://www.cb1100forum.com/forum/showthr...p?tid=6755
Find
Reply
the Ferret Offline
Road Warrior
Posts: 23,490
Threads: 697
Likes Received: 620 in 277 posts
Likes Given: 789
Joined: Apr 2025
#7
11-15-2017, 01:16 PM
If it is the clutch lever squealing that should fix it. PLease let us know. I'm surprised it's happening on a new bike though. Musta got past the luber at the factory.
Find
Reply
itstuantran_imp Offline
Running Like a Top
Posts: 91
Threads: 7
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2017
#8
11-15-2017, 06:09 PM
Yes Ferret. It even leaked at the head gasket as many posts discussed before regarding oil seapage or leakage Big Grin but i have got it fixed by applying a layer of sealant beneath the gasket. No more leak since then.

(11-15-2017, 01:16 PM)The ferret_imp Wrote: If it is the clutch lever squealing that should fix it. PLease let us know. I'm surprised it's happening on a new bike though. Musta got past the luber at the factory.
Find
Reply
the Ferret Offline
Road Warrior
Posts: 23,490
Threads: 697
Likes Received: 620 in 277 posts
Likes Given: 789
Joined: Apr 2025
#9
11-15-2017, 10:38 PM
Head gasket or valve cover gasket?
Find
Reply
ChipBeck_imp Offline
Road Warrior
Posts: 784
Threads: 29
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
#10
11-16-2017, 07:32 AM
"Squealing when pulling clutch"

I suggest tempering your enthusiasm.

Chip
Find
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CLUTCH FLUID CHANGE SUPERCRUZ_imp 15 1,290 12-24-2025, 11:14 AM
Last Post: pdedse
  Replace clutch Lever Davidjill_imp 10 997 02-06-2025, 01:27 AM
Last Post: peterbaron
  Clutch Plates finally going? misterprofessionality 12 1,083 11-22-2024, 07:49 AM
Last Post: peterbaron
  Clutch fluid change CB1100@2013: photos valkyrie_rider_imp 0 246 02-13-2024, 10:27 AM
Last Post: valkyrie_rider_imp
  Clutch Fluid Wagonpeddler_imp 32 2,542 06-14-2023, 08:09 AM
Last Post: bvictory_imp
  Clutch Not Working Henrik_imp 7 657 04-24-2023, 06:43 PM
Last Post: Henrik_imp
  Clutch pull mpuhl_imp 4 516 02-21-2023, 10:48 AM
Last Post: GoldOxide_imp
  Clutch slave cylinder gasket Maturecheese_imp 3 399 01-27-2023, 12:33 AM
Last Post: Maturecheese_imp
  brake & clutch adjusters The Gecko_imp 10 859 11-25-2022, 08:47 AM
Last Post: GoldOxide_imp
  Clutch Lever Full Engagement odelegacy_imp 41 2,699 10-28-2022, 09:27 PM
Last Post: Cormanus

Forum Jump:


Users browsing this thread: 1 Guest(s)