Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turn Signal mounts OEM
#1
My 2013 came with the blinkers mounted on the tall light bracket via a small other bracket.

I'm looking to mount them on the grab rail and am in need of some washer, or a bolt and a washer, that holds the turn signal to the grab rail. If anyone has these parts laying around I am in need and am willing to pay some cash money Smile

Thought I would check here before calling a dealer.

Thanks in advance,

HW
Reply
#2
Items 9,10 and 14 are what you need: https://www.partzilla.com/catalog/honda/...urn-signal
Reply
#3
Cool
(04-14-2018, 09:16 PM)Lord Popgun_imp Wrote: Items 9,10 and 14 are what you need: https://www.partzilla.com/catalog/honda/...urn-signal

thanks. I have all of those parts. What I believe I need is part 8 on this schematic.

Anyone have a pair of these that you are not using?
Reply
#4
Yeah, those too. I forgot about those...
Reply
#5
(04-14-2018, 11:07 PM)Lord Popgun_imp Wrote: Yeah, those too. I forgot about those...

So many parts, so little time...

thanks
Reply
#6
Any chance its still there? Reach your finger around and see if you can feel it. Or look.
Reply
#7
(04-15-2018, 12:09 AM)Lord Popgun_imp Wrote: Any chance its still there? Reach your finger around and see if you can feel it. Or look.

Nope not there. Not a huge deal the part is cheap enough. I'll order it if no one has them laying around.

thanks

HW
Reply
#8
Funny how the world works- I took all that stuff off years ago and the bits have just been sitting in my garage.

The weather was warm recently so I opened the door, cleaned up a little and binned numerous smaller parts I will never use again.
Reply
#9
(04-15-2018, 11:31 PM)PowerDubs_imp Wrote: Funny how the world works- I took all that stuff off years ago and the bits have just been sitting in my garage.

The weather was warm recently so I opened the door, cleaned up a little and binned numerous smaller parts I will never use again.

I totally understand. All good.
Reply
#10
(04-15-2018, 11:31 PM)PowerDubs_imp Wrote: Funny how the world works- I took all that stuff off years ago and the bits have just been sitting in my garage.

The weather was warm recently so I opened the door, cleaned up a little and binned numerous smaller parts I will never use again.

Tried to send you a PM but your box is full

Happy to send you the bracket. It's a small bit of metal. Give me your address and I will send it to you.

Howard
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear indicator (Turn signal) relocation bracket 2013 model AndyBeeMD 15 1,091 08-16-2025, 05:01 PM
Last Post: bflint
  Pictures of OEM Rear turn signal mount Houndwheels_imp 8 519 09-12-2023, 10:28 AM
Last Post: Houndwheels_imp
  removing rear turn signal modmaster_imp 12 687 04-20-2023, 10:17 AM
Last Post: Lord Popgun
  After market turn signal on CB 1100rs 2018 not working Saltani_imp 6 377 12-08-2022, 09:24 PM
Last Post: leung_imp
  Turn Signal Switch and Horn Button Locations pekingduck 26 1,234 07-12-2022, 08:04 PM
Last Post: tommymck_imp
  2013 turn signal replacement RF(OEM) casey66_imp 17 839 01-15-2022, 01:31 AM
Last Post: Bazbro_imp
  Turn Signal Malfunction billyfinchapel_imp 5 372 05-04-2021, 01:51 PM
Last Post: billyfinchapel_imp
  rear signal assembly cj599_imp 14 684 03-19-2021, 08:14 AM
Last Post: cj599_imp
  Rear Turn Signal relocation paulw_imp 10 565 03-07-2021, 05:50 AM
Last Post: peterbaron
  Putting 2013 horn/turn signal switch on a 2017 pekingduck 9 405 01-02-2020, 08:37 AM
Last Post: GoldOxide_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)