+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Turn Signal mounts OEM (/showthread.php?tid=5218)
Turn Signal mounts OEM - HWdesign_imp - 04-14-2018
My 2013 came with the blinkers mounted on the tall light bracket via a small other bracket.
I'm looking to mount them on the grab rail and am in need of some washer, or a bolt and a washer, that holds the turn signal to the grab rail. If anyone has these parts laying around I am in need and am willing to pay some cash money
Thought I would check here before calling a dealer.
Thanks in advance,
HW
RE: Turn Signal mounts OEM - Lord Popgun - 04-14-2018
Items 9,10 and 14 are what you need: https://www.partzilla.com/catalog/honda/motorcycle/2013/cb1100-ac/turn-signal
RE: Turn Signal mounts OEM - HWdesign_imp - 04-14-2018
(04-14-2018, 09:16 PM)Lord Popgun_imp Wrote: Items 9,10 and 14 are what you need: https://www.partzilla.com/catalog/honda/motorcycle/2013/cb1100-ac/turn-signal
thanks. I have all of those parts. What I believe I need is part 8 on this schematic.
Anyone have a pair of these that you are not using?
RE: Turn Signal mounts OEM - Lord Popgun - 04-14-2018
Yeah, those too. I forgot about those...
RE: Turn Signal mounts OEM - HWdesign_imp - 04-15-2018
(04-14-2018, 11:07 PM)Lord Popgun_imp Wrote: Yeah, those too. I forgot about those...
So many parts, so little time...
thanks
RE: Turn Signal mounts OEM - Lord Popgun - 04-15-2018
Any chance its still there? Reach your finger around and see if you can feel it. Or look.
RE: Turn Signal mounts OEM - HWdesign_imp - 04-15-2018
(04-15-2018, 12:09 AM)Lord Popgun_imp Wrote: Any chance its still there? Reach your finger around and see if you can feel it. Or look.
Nope not there. Not a huge deal the part is cheap enough. I'll order it if no one has them laying around.
thanks
HW
RE: Turn Signal mounts OEM - PowerDubs_imp - 04-15-2018
Funny how the world works- I took all that stuff off years ago and the bits have just been sitting in my garage.
The weather was warm recently so I opened the door, cleaned up a little and binned numerous smaller parts I will never use again.
RE: Turn Signal mounts OEM - HWdesign_imp - 04-16-2018
(04-15-2018, 11:31 PM)PowerDubs_imp Wrote: Funny how the world works- I took all that stuff off years ago and the bits have just been sitting in my garage.
The weather was warm recently so I opened the door, cleaned up a little and binned numerous smaller parts I will never use again.
I totally understand. All good.
RE: Turn Signal mounts OEM - HWdesign_imp - 04-17-2018
(04-15-2018, 11:31 PM)PowerDubs_imp Wrote: Funny how the world works- I took all that stuff off years ago and the bits have just been sitting in my garage.
The weather was warm recently so I opened the door, cleaned up a little and binned numerous smaller parts I will never use again.
Tried to send you a PM but your box is full
Happy to send you the bracket. It's a small bit of metal. Give me your address and I will send it to you.
Howard