06-23-2020, 03:30 PM
Well still waiting on the seals so I found out YSS Suspension are only half an hour away from me so I bit the bullet and went down there and bought their 33mm Promax PD valves which look identical to the Racetech ones at only half the price (AU$149). They look very well made.
I took my dampner rods for him to measure and have a look at and he said since they already have 4 x 6mm holes in them as standard, he didnt think it neccessary to drill them out any more.
So the mod is basically cutting 20mm off the spacer and putting it back together, the valves are preset and he didnt think I would need to adjust them.
I took my dampner rods for him to measure and have a look at and he said since they already have 4 x 6mm holes in them as standard, he didnt think it neccessary to drill them out any more.
So the mod is basically cutting 20mm off the spacer and putting it back together, the valves are preset and he didnt think I would need to adjust them.