07-25-2020, 07:27 AM
Resurrecting this thread for a question. I have the OEM guards for my '17 EX (chrome). When I connect the bottom part of the mounting bracket (with the top slot and the 8mm bolt), the parts the 8mm bolt are supposed to connect are far enough apart that the bolt doesn't even go all the way through. It's as though the frame tube is too large, which doesn't make sense as these are Honda parts. I put one layer of electrical tape around the tube for protection but that can't have added this much to the circumference.
Am I missing a trick here?
Pic is blurry but you can see the gap.
Am I missing a trick here?
Pic is blurry but you can see the gap.