06-18-2021, 04:42 PM
If the connectors are like mine they are very small and likely fit one by one through that opening, if you remove seat ( with the engine off
) and pull out the black plastic tool basket in front of the battery you can see the orange and light blue connectors in the clear plastic cover.
They unclip and can be worked back toward the rear of the bike.
It looks like they can fit through that opening one at a time, the cables near those connectors are a smaller diameter than the sheathed ones that travel through this opening, so pull both back, bring the connectors close to the opening and use the smaller diameter wires to pass the connectors one at a time.
) and pull out the black plastic tool basket in front of the battery you can see the orange and light blue connectors in the clear plastic cover.They unclip and can be worked back toward the rear of the bike.
It looks like they can fit through that opening one at a time, the cables near those connectors are a smaller diameter than the sheathed ones that travel through this opening, so pull both back, bring the connectors close to the opening and use the smaller diameter wires to pass the connectors one at a time.