12-16-2020, 09:11 PM
You do not have to remove your tank.
Remove the bolt (M12 wrench/socket) that holds the tank and lift its end up by about 4"/10 cm, would be easier if you also disconnect the breather hose**
I place 2x4 between the tank and frame, while replacing plugs.
M14 deep socket socket and 3/8 ratchet will do this job.
Easy peasy, 1/2 hr job and you are running again ...
**
Remove the bolt (M12 wrench/socket) that holds the tank and lift its end up by about 4"/10 cm, would be easier if you also disconnect the breather hose**
I place 2x4 between the tank and frame, while replacing plugs.
M14 deep socket socket and 3/8 ratchet will do this job.
Easy peasy, 1/2 hr job and you are running again ...

**
