10-06-2022, 09:21 AM
Thanks for that bit of info. I was suspicious of such a thing but didn't think the line was bend in such a way. The tie wrap method didn't work. I have been using a vacuum bleeder as I have on all my bikes and cars.
This one really takes the cake. I even took the slave cylinder off and turned the bleed valve to 12 o'clock thinking the slight tilt might be doing it. Nope. I will pull the tank tomorrow and get to searching. I may even look to find a fluid PUMP that'll push from the bleed valve up but will have to watch the master cylinder to keep the mess to a minimum. I'll report back, thanks. If this works I may fall in love with this bike again. TM
This one really takes the cake. I even took the slave cylinder off and turned the bleed valve to 12 o'clock thinking the slight tilt might be doing it. Nope. I will pull the tank tomorrow and get to searching. I may even look to find a fluid PUMP that'll push from the bleed valve up but will have to watch the master cylinder to keep the mess to a minimum. I'll report back, thanks. If this works I may fall in love with this bike again. TM