02-21-2023, 10:48 AM
(02-21-2023, 07:47 AM)Charlie Bravo_imp Wrote: I was having trouble with my clutch on my '13. I took off the reservoir cap, and the expansion membrane in there was unseated and all wrinkled up. I pulled it out, straightened it, reinstalled it, added about a tablespoon of fluid, and all good. You may have a kink in the line, or some other kind of blockage that doesn't allow the transfer of energy to the master cylinder. Maybe the master cylinder has a leak. Inspect the whole system.
I concur - a possible issue easily identified. Had that happen once on an '84 CB750SC hydraulic clutch. Anyway, the same remedy.
