06-24-2019, 07:17 AM
Yep. In the photo above, the thin screwdriver blade of the multi-tool was used to gently pry the dust seal free and slide it up the tube.
It's also a good idea to run the tool between the fork tube and the dust seal. That'll keep any trapped dirt from migrating down to the actual fork seal.
Pekingduck also makes a good point about cleaning out the area above the fork seal before you start. I used a microfiber cloth wrapped around the point of the screwdriver blade and ran it around the top of the seal. This gets rid of any potential contaminants that have already made it past the dust seal.
If you're referring to the clear plastic clamshell type material, I think that might be a bit thick and rigid for this application. The tool has to be thin enough to bend easily and conform to the round shape of the tube as you slide it around the seal.
If you do decide to try it, make sure the edges are super smooth. The last thing you want to do is cut or tear the soft rubber seal.
It's also a good idea to run the tool between the fork tube and the dust seal. That'll keep any trapped dirt from migrating down to the actual fork seal.
Pekingduck also makes a good point about cleaning out the area above the fork seal before you start. I used a microfiber cloth wrapped around the point of the screwdriver blade and ran it around the top of the seal. This gets rid of any potential contaminants that have already made it past the dust seal.
(06-24-2019, 12:24 AM)Ben70_imp Wrote: Great tip Flyn! I nominate the clear plastic packaging that many items from Costco are encased in. Haven't tried it but I am going to save any flat pieces I come across for future reference. Thanks for the tip.
Ben
If you're referring to the clear plastic clamshell type material, I think that might be a bit thick and rigid for this application. The tool has to be thin enough to bend easily and conform to the round shape of the tube as you slide it around the seal.
If you do decide to try it, make sure the edges are super smooth. The last thing you want to do is cut or tear the soft rubber seal.