Aftermarket turn signals - Need some help.

[Huladog_imp]

Apparently the hex head screw that holds the front turn signal to the mounting bracket is a 6mm diameter from what others have described when they did the tear down.

Looking at the pics in this message thread I can see that mounting hole and others have opened up that hole to take the more common 8mm mounting bolt that most aftermarket turn signals seem to come with.

I was checking generic turn signals on eBay and most came with 8mm bolts, have found some with 7mm but only found one seller who had 6mm bolts but those were LED turn signals.

From an online OEM parts catalog they show that front turn signal mounting screw as:

BOLT, SOCKET (6X10)
96600-06010-00
$2.95

Aloha,
Huladog